The lug nuts on a 2013 Honda Fit are M12x1.5 with a 19 mm hex socket.
In practice, the 2013 Fit uses four lug nuts per wheel and a standard conical (60-degree) seat. This configuration is typical for factory wheels across most trims, but if you’re working with aftermarket wheels, verify the lug nut size, seating, and torque specification with the wheel manufacturer or service manual to avoid improper seating or damage.
Specifications
These items summarize the factory lug nut specifications you’ll typically encounter on the 2013 Honda Fit.
- Thread size: M12 x 1.5 (12 mm diameter, 1.5 mm thread pitch)
- Seat type: conical (60-degree) lug nut
- Nut type: lug nut with 19 mm hex socket
- Per wheel: 4 lug nuts
- Applicability: fits 2013 Honda Fit (most trims with factory wheels)
These specs cover standard factory configurations; verify with the owner's manual or wheel manufacturer if you have aftermarket wheels or non-OEM options.
Maintenance and verification
To keep wheels secure and safe, follow these steps to verify lug nut size, seating, and torque on your 2013 Fit.
- Use the correct socket (19 mm) and a calibrated torque wrench for installation and removal.
- Torque to the manufacturer’s specification (found in the owner's manual or service data) and recheck after 50–100 miles (80–160 km) of driving.
- Inspect lug nuts and studs for damage, corrosion, or loosening after tire rotations or wheel work.
- If installing aftermarket wheels, confirm the lug nut size and seat type with the wheel manufacturer and ensure hub centering compatibility.
Regular torque checks and proper seating help prevent wheel detachment and vibration.
Considerations for aftermarket wheels
Some aftermarket wheels may use different lug nut sizes, seats, or require locking lug nuts. Always verify compatibility and torque specs for each wheel set, and consult wheel documentation or a qualified technician.
Summary
The 2013 Honda Fit uses M12x1.5 lug nuts with a 19 mm hex, standard for factory wheels. If you switch to aftermarket wheels, verify the lug nut size, seating, and torque with the wheel supplier or service manual, and recheck torque after installation and during later inspections.