The 2012 Honda Civic LX with the 1.8-liter engine uses about 4.7 quarts (4.4 liters) of engine oil when performing an oil change with the filter, using 0W-20 oil.
In context, the Civic LX from this year is powered by a 1.8-liter inline-four. The official specification lists 4.7 quarts (4.4 liters) of engine oil with a new filter. Honda generally recommends 0W-20 viscosity for this engine, though 5W-20 can be acceptable if 0W-20 isn’t available in certain climates; always verify with the owner's manual or a dealer if you’re unsure.
Oil capacity specifics for the 2012 Civic LX
Overview of capacity and grade
Below are the key figures and recommendations as published for this model year. These numbers are what you should start with when performing an oil change.
Before listing the details, note that the following information pertains to a standard oil change with a new filter and that slight variations can occur.
- Engine oil capacity with filter: 4.7 quarts (4.4 liters)
- Recommended oil viscosity: 0W-20 (API SN or newer). If 0W-20 is unavailable, 5W-20 is commonly acceptable depending on local climate; consult the manual for precise guidance.
When filling, begin with the stated amount and recheck the level with the dipstick after the oil has settled, adding small increments as needed to reach the full mark.
Practical notes for maintenance
Always refer to the 2012 Civic owner's manual or a Honda service advisor for the exact specification, as factory guidance can vary by market or production run. Using the correct oil type and accurate quantity helps protect the engine and maintain performance over time.
Summary
For a 2012 Honda Civic LX, plan on about 4.7 quarts (4.4 liters) of engine oil with a new filter, using 0W-20 oil as the baseline. Confirm the exact specification in the owner's manual and check the level with the dipstick after adding oil to ensure proper fill.