The 2010 Honda CR-V requires 5W-20 engine oil, typically a synthetic blend or full synthetic that meets API SN or newer, with an approximate capacity of 4.5 quarts per oil change.
Oil Type and Viscosity
The CR-V’s 2.4-liter four-cylinder engine is designed for 5W-20 viscosity under normal operating conditions. Use a synthetic blend or full synthetic that meets API SN (or newer) and ILSAC GF-5 standards. Honda recommends using a quality oil that complies with the manufacturer’s specifications, such as Honda Genuine Motor Oil or an equivalent from a reputable brand.
Recommended oil options
Choose a product that provides the correct viscosity and meets API SN or newer and ILSAC GF-5 standards. The typical options that satisfy those specs include:
- 5W-20 synthetic blend API SN/ILSAC GF-5
- 5W-20 full synthetic API SN/ILSAC GF-5
Note: Always verify the label and consult your owner's manual for the exact specification for your region and climate.
Capacity and Maintenance Schedule
Oil capacity and maintenance intervals are important for engine protection. The CR-V’s oil capacity with filter is approximately 4.5 quarts. Oil-change intervals depend on driving conditions and the oil type used; conventional oils typically require more frequent changes than synthetic oils.
- Oil capacity with filter: about 4.5 quarts (4.3–4.5 L)
- Typical change intervals: follow the owner's manual; conventional oil often requires 3,750–5,000 miles (6,000–8,000 km) between changes under normal conditions; synthetic oils commonly allow 7,500–10,000 miles (12,000–16,000 km) under normal conditions; severe driving conditions may necessitate sooner changes
Always consult the owner's manual and your dealer for exact intervals based on your driving profile and the oil you choose.
Additional Notes
Regional variations
Some regions or model years may have minor differences in recommendations; always follow the manual for your specific vehicle VIN and market.
Summary
In short, a 2010 Honda CR-V uses 5W-20 engine oil, preferably a synthetic blend or full synthetic that meets API SN and ILSAC GF-5 standards, with a typical oil capacity of about 4.5 quarts per change. Choose the oil based on your climate, follow the maintenance schedule in the owner's manual, and use a reputable brand to keep the engine running smoothly.