The lug nuts for a 2006 Honda Odyssey use a 12 x 1.5 thread with a 60-degree conical seat, and they typically require a 19 mm (3/4 inch) hex socket for installation and removal.
For context, the 2006 Odyssey is part of Honda’s fifth-generation minivans and rides on five-lug wheels. Knowing the exact lug nut size helps when ordering replacements, swapping wheels, or fitting aftermarket rims. This article outlines the core specs and practical notes to help you confirm the right nuts for your vehicle.
Core specifications
Before shopping for replacements or checking compatibility, here are the essential measurements you’re most likely to encounter.
- Thread size: 12 x 1.5 (metric) for the lug studs
- Seat type: 60-degree conical seat
- Hex size: 19 mm (3/4 inch) hex for typical OEM wheels and many aftermarket wheels
These specs cover the standard factory setup for most 2006 Odysseys. If your vehicle uses a different wheel option or aftermarket rims, verify compatibility with the wheel manufacturer or a dealership service sheet.
Practical considerations
When replacing nuts or installing new wheels, a few practical notes help prevent damage and ensure safety.
Torque and installation considerations
Always torque lug nuts to the manufacturer’s specification and use a star or crisscross pattern to ensure even seating. If you don’t have the exact torque value for your wheels, consult the owner’s manual or a trusted service bulletin.
Summary: For a 2006 Honda Odyssey, the lug nuts use a 12 x 1.5 thread with a 60-degree conical seat and a 19 mm hex size. Verify with your wheel model or owner’s manual, especially when using aftermarket rims.