The correct oil filter for a 2010 Honda Accord depends on the engine under the hood. If your car has the 2.4-liter four-cylinder, use Honda’s 15400-PLM-A01; if it has the 3.5-liter V6, use 15400-PRB-A01. These are the official Honda Genuine parts most commonly installed on these engines.
The 2010 Accord was offered with two engine choices, and each engine uses a different filter design. This guide explains how to identify your engine, what part numbers are typically used, and how to confirm the right filter for your vehicle. It also covers basic tips for replacement and verification to ensure you’re using the correct part for your VIN.
Engine options in the 2010 Accord
Knowing which engine your Accord uses is the first step in selecting the correct oil filter. Below are the two commonly equipped engines and the corresponding OEM oil filter numbers.
2.4-liter inline-4 (K-series)
For the 2.4L engine, the standard OEM filter used by Honda is the Honda Genuine Oil Filter with part number 15400-PLM-A01. This filter is designed to fit the K-series 2.4L configuration found in many 2008–2010 Accords and similar models.
Before listing options, here is the official filter reference for this engine:
- Honda Genuine Oil Filter: 15400-PLM-A01
The use of the correct filter is important for proper oil flow and engine protection. If you own a 2.4L Accord and want to explore high-quality aftermarket options, consult a trusted parts supplier to confirm compatibility with your exact VIN and production date.
3.5-liter V6 (J-series)
For the 3.5L V6, the commonly recommended OEM filter is Honda Genuine Oil Filter with part number 15400-PRB-A01. This filter is compatible with the J-series V6 engines used in some 2010 Accords.
Before listing options, here is the official filter reference for this engine:
- Honda Genuine Oil Filter: 15400-PRB-A01
As with the 2.4L engine, using the correct filter is essential for proper oil filtration and engine longevity. If you’re considering aftermarket brands, verify with the retailer that the product matches the 15400-PRB-A01 specification and is suitable for your VIN and production date.
How to verify compatibility and make a purchase
Because production runs can vary by date and region, it’s prudent to double-check the exact part number against your vehicle’s VIN. You can do this by checking the Honda Parts website, contacting a Honda dealer, or consulting a reputable parts distributor with access to the official parts catalog. When buying, ensure the filter’s threads, gasket size, and overall dimensions match your engine’s requirements.
Summary
For a 2010 Honda Accord, the oil filter you need depends on the engine. Use 15400-PLM-A01 for the 2.4L engine and 15400-PRB-A01 for the 3.5L V6 as your primary references. Always verify with your VIN and consult your owner’s manual or a dealer to confirm the exact part number before purchasing. Regular filter replacement supports proper oil filtration and engine health over time.