The standard front wiper blades for most 2004 Corolla models are 26 inches on the driver’s side and 16 inches on the passenger’s side. If your car has a rear wiper (some hatchback/wagon variants in certain markets), the rear blade is typically about 12 inches. Always verify with your owner’s manual or by checking the blades currently on the car to ensure the exact fit.
Front wiper sizes for the 2004 Corolla
Below are the sizes that cover the majority of North American-spec 2004 Corollas. If your market differs, sizes may vary, so use these as a baseline and confirm before purchasing.
- Driver-side front wiper blade: 26 inches
- Passenger-side front wiper blade: 16 inches
These lengths align with the common 2003–2008 Corolla generation in many regions. If you replaced blades previously or you’re in a non-US market, double-check the fit to avoid ordering the wrong size.
Rear wiper (if equipped)
Some Corolla variants, particularly certain hatchback or wagon models in specific markets, include a rear wiper. When present, the rear blade is typically around 12 inches, though some versions may use 10–12 inches. Verify the exact length by measuring the current blade or consulting the owner’s manual.
How to verify the exact size for replacement
To ensure you purchase the correct blades, use these verification steps before shopping:
- Inspect the current blades and measure the overall length from tip to end for each side.
- Consult the owner’s manual or windshield wiper section for the specified blade lengths.
- Use an automotive parts retailer’s compatibility tool by entering the vehicle year, make, model, and trim, then confirm the blade lengths shown.
By confirming the sizes before buying, you avoid buying the wrong length blades and wasting time in-store or online.
Summary
For a 2004 Toyota Corolla, the typical front wiper sizes are 26 inches on the driver side and 16 inches on the passenger side. If the model includes a rear wiper, expect a rear blade around 12 inches. Always verify with the manual or current blades, especially if you’re in a different market or working with a non-US trim.