For a 2008 Honda Accord, use a Honda genuine oil filter matched to your engine: 15400-PLM-A01 for the 2.4L four-cylinder and 15400-PLM-A02 for the 3.0L V6. If you can’t verify the exact number, choose a high-quality filter that matches Honda’s standard 3/4-16 thread and gasket size and confirm via VIN or the parts diagram.
The 2008 Accord was offered with two engine options—the 2.4-liter four-cylinder and the 3.0-liter V6—each requiring a specific oil filter that fits the engine’s oiling system and mounting. Exact part numbers can vary by market or production date, so it's best to confirm with your vehicle’s VIN or by inspecting the current filter and the official parts catalog. This article lays out how to identify the correct filter and what to consider when substituting aftermarket options.
Engine options and their filters
These are the two engine configurations you might have in a 2008 Accord, and the corresponding filter families used by Honda and many aftermarket suppliers:
- 2.4 L inline-4 (K-series) — typically uses Honda oil filter part number 15400-PLM-A01.
- 3.0 L V6 (J-series) — typically uses Honda oil filter part number 15400-PLM-A02.
Note: Exact part numbers can vary by market or production date. Always verify with the vehicle’s VIN or the official parts diagram before buying.
How to confirm the exact filter you need
Use this checklist to lock in the right filter when you shop or pull a filter from your car.
- Identify your engine code and trim from the VIN or the owner's manual (2.4L K-series or 3.0L J-series).
- Inspect the current oil filter for its part number or markings that indicate the model; some filters list the Honda part code on the can.
- Consult the official Honda parts catalog for your VIN or use a reputable auto-parts database to cross-reference the exact filter for your engine and year.
- If in doubt, purchase the OEM filter for your engine or select a high-quality aftermarket filter that explicitly states compatibility with Honda 2.4L i4 or 3.0L V6 and the 3/4-16 thread size.
Following these steps minimizes the risk of improper fit or filtration performance and helps ensure proper oil flow and sealing.
Maintenance tips and considerations
Regardless of which filter you choose, replace the oil filter every time you change the oil, and use the recommended oil grade and capacity for your engine. Honda generally recommends 5W-20 or 5W-30 depending on climate and model year; consult the owner's manual for specifics. Ensure the drain plug gasket is in good condition and avoid overtightening the filter during installation.
Summary: The 2008 Honda Accord requires an oil filter that matches its engine configuration (2.4L or 3.0L). OEM part numbers commonly cited are 15400-PLM-A01 for the 2.4L and 15400-PLM-A02 for the 3.0L, though you should verify via VIN or the official parts catalog. A high-quality aftermarket filter with the correct thread size and gasket can be a suitable alternative when it explicitly lists compatibility.
What kind of oil filter does a Honda Accord use?
FRAM Drive – Spin-on Oil Filter: Ideal for Conventional Oil, Protection up to 7,500 miles (Part No. FD7317)
What is the OEM oil filter for a 2008 Honda Accord?
This OEM Honda oil filter, part number 15400-PLM-A02, fits select Honda vehicles from model years 2000 all the way to 2021. Its job is to collect both the impurities in motor oil and whatever else accumulates as the oil lubricates engine parts.
What kind of oil does a Honda Accord 2008 use?
Finding the Right Motor Oil for a 2008 Honda Accord
Honda recommends getting motor oil that has the starburst symbol from the International Lubricant Standardization and Approval Committee (ILSAC). This symbol lets the buyer know that the oil is acceptable for use in almost any gasoline engine.
What oil filter does a 2008 Honda Accord need?
15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.