Your 2019 Honda Pilot uses 0W-20 engine oil, and the oil capacity with the filter is about 5.7 quarts (5.4 liters). Use a high-quality synthetic 0W-20 that meets API SN or newer and ILSAC GF-5 or newer. Honda Genuine Motor Oil or an equivalent that meets these specs is recommended.
In more detail, the Pilot’s 3.5-liter V6 is designed for efficiency and reliable performance with a thin 0W-20 lubricant. Choosing the right viscosity and standard helps maintain fuel economy, cold-start protection, and engine longevity. The total capacity with the filter is roughly 5.7 quarts, and you should verify the exact amount on your dipstick after the change. For the best results, opt for a full-synthetic 0W-20 that meets the API and ILSAC specs and replace the oil filter at each change.
Oil specifications to look for
The following specs ensure you use the right oil for the 2019 Honda Pilot:
- Viscosity: 0W-20
- Oil type: synthetic or synthetic-blend meeting API SN/SN+ and ILSAC GF-5 or newer
- Capacity: about 5.7 quarts (5.4 liters) with filter
- Filter: Honda genuine oil filter or equivalent
These specifications align with Honda's engineering requirements and help maintain engine protection and fuel efficiency.
Change interval and maintenance tips
Oil-change intervals are guided by the vehicle’s maintenance minder system. With synthetic 0W-20, it’s common to see changes around every 7,500 miles under normal conditions, but you may need to change sooner in severe driving, heavy towing, or extreme temperatures. Always follow the Maintenance Minder prompts and regularly check the oil level using the dipstick when convenient.
Where to source the oil
You can purchase Honda Genuine Motor Oil 0W-20 or a high-quality alternative that meets API SN/SN+ and GF-5. Ensure the oil viscosity and standards match the vehicle’s requirements and use the correct filter to ensure proper lubrication and flow.
Bottom line
For a 2019 Honda Pilot, 0W-20 engine oil (full synthetic preferred) is the correct choice, with an approximate capacity of 5.7 quarts including the filter. Following Honda's maintenance minder and using the right specifications will help protect the V6 engine's reliability and efficiency.
Summary
In summary, the 2019 Honda Pilot requires 0W-20 viscosity oil, typically about 5.7 quarts with a filter, and the oil should meet API SN/SN+ and ILSAC GF-5 or newer. Use a reputable full-synthetic 0W-20 and replace the oil filter at each change, guided by the Maintenance Minder system.