Two fuse boxes: one in the engine compartment (Power Distribution Box) and one inside the cabin (interior fuse box).
In the 2017 Accord, electrical protection is divided between an engine-bay power distribution block and a separate interior fuse panel. This layout is common among late-model Hondas, keeping critical engine circuits and vehicle electronics protected in separate enclosures. For precise fuse mapping and amperage ratings, consult the owner's manual or the fuse box covers.
Locations and what they cover
There are two main fuse boxes and their general purposes are summarized below.
- Engine compartment fuse box (Power Distribution Box) — Located in the engine bay, typically toward the side/fender or near the firewall. It contains fuses for major systems such as engine management, ignition, fuel, charging, ABS, and other high-current circuits.
- Interior fuse box — Located inside the cabin on the driver's side, usually behind a panel under the dash (left knee area). It houses fuses for interior electronics, lighting, climate control, infotainment, power windows, door locks, and related circuits.
These two blocks cover the vast majority of the Accord's electrical needs. If you encounter a blown fuse, replace only with the same amperage rating and refer to the manual for the exact circuit layout.
Engine compartment fuse box
Access: Open the hood, identify the fuse box cover, and remove it to view fuses and relays. If you need to replace a fuse, pull it straight out with pliers and insert a new one of the same rating.
Interior fuse box
Access: With the door open, remove the interior fuse box cover to inspect fuses. Use the legend on the cover or inside the manual to locate the affected circuit.
Summary
In summary, the 2017 Honda Accord uses two fuse boxes: one in the engine compartment and one inside the cabin. Always consult the owner's manual for the exact fuse map and amperage requirements, and exercise caution when servicing fuses.