The 2001 Honda Accord's four-cylinder engine is rated at 135 horsepower.
The figure comes from Honda's 2.3-liter F23A1 inline-4 used in most North American Accords that year; horsepower is SAE net and is listed at about 5,800 rpm with around 150 lb-ft of torque at about 4,000 rpm. Some markets may have small variations, and the rating is typically the same across automatic and manual transmissions.
Engine details and horsepower figure
The 2001 Accord offered a 2.3-liter inline-4 known as the F23A1. The official horsepower rating is 135 hp (SAE net) at roughly 5,800 rpm, with peak torque around 150 lb-ft at about 4,000 rpm.
Note: These figures apply to most North American models of that year; minor variations can occur by market and trim. The horsepower rating is generally the same regardless of whether the car came with an automatic or a manual transmission.
Key specifications for the 2001 Accord's 4-cylinder option:
- Engine: 2.3-liter inline-4 (F23A1)
- Horsepower: 135 hp (SAE net) @ ~5,800 rpm
- Torque: 150 lb-ft @ ~4,000 rpm
- Available transmissions: 4-speed automatic or 5-speed manual
In short, if you’re looking at a typical 2001 Accord with the factory 4-cylinder setup in North America, expect about 135 horsepower in stock condition.
Variations by market
While 135 hp is the common figure for US/Canada-spec 2001 Accords with the 2.3-liter engine, some international markets may show slight differences due to emissions equipment and testing standards. Always verify the exact spec sheet for a given vehicle if precision is crucial.
Context and practical impact
horsepower is a useful benchmark for pure engine output, but real-world performance also depends on weight, gearing, and drivetrain factors. The 2001 Accord’s 4-cylinder model prioritizes balanced efficiency and adequate acceleration rather than high-end punch, especially compared with later 2.4- and 2.0-liter configurations.
Summary
The 2001 Honda Accord equipped with the four-cylinder 2.3-liter engine delivers 135 horsepower (SAE net), with about 150 lb-ft of torque. This rating is typical for North American 4-cylinder Accords from that model year and remains a practical reference for performance discussions. Always check the specific vehicle’s documentation for exact figures, especially if the car was imported or modified.