For a 2007 Honda Accord, a CV axle part typically costs between about $60 and $250, depending on whether you choose aftermarket or OEM, and whether it’s a new or remanufactured unit. Labor to install is usually around $100–$250 per axle, so the total installed price generally falls in the $260–$500 range per axle.
This article breaks down the current market, the factors that influence price, and tips for shopping around. The 2007 Accord uses front-wheel drive with independent suspension and CV axles on both sides. Prices vary by engine type (4-cylinder vs V6) and by whether you’re replacing one axle or both. The exact price you’ll pay depends on the part quality, retailer, and local labor rates.
Price snapshot
Prices for CV axles fall into a few broad categories, reflecting quality and source. Here is a quick breakdown to guide buyers.
- OEM/new from a dealer or Honda-specific supplier: typically $150–$260 per axle
- Aftermarket/new or remanufactured: typically $60–$150 per axle
- Used or salvaged parts: typically $40–$100 per axle
These ranges show part costs only; actual total prices include labor and any related hardware or services.
Labor and installation costs
Labor to replace a CV axle is highly dependent on local rates and whether both sides are done at once. Expect installation to run roughly $100–$250 per axle in many U.S. shops, with higher-end urban shops charging toward the upper end. Some shops include the axle nut, boot clamps, and any necessary alignment in the quoted price, while others bill them separately.
When planning, remember that if the hub or bearing also needs service, or if you discover additional worn joints, the price can rise. Always ask for a line-by-line quote before work begins.
Where to buy and how to choose
Shoppers have several avenues to source a CV axle, each with trade-offs between price, warranty, and fitment guarantees. Here’s where buyers commonly turn.
- Auto parts retailers (AutoZone, Advance Auto Parts, O'Reilly): wide selection, often same-day pickup; price ranges vary by brand
- OEM/dealer: guaranteed fit and warranty but typically the most expensive
- Online retailers (RockAuto, other parts websites, or marketplaces): potential savings but verify return policies and compatibility
Compare warranty terms (lifetime vs limited), return policies, and ensure you’re ordering the correct side (left vs right) and the right axle length for your engine and transmission combination.
What to check before replacing
Compatibility and fitment
Confirm the exact part number by using your Honda’s VIN, engine size, and transmission type. The 2007 Accord was offered with multiple configurations, and the CV axle length and joint styles can differ. A wrong part can cause fitment issues or reduced performance.
Parts and service details
Some listings include the axle nut and clamps; others do not. If your installation includes a wheel hub and bearing service, or you need a new axle nut, factor those costs in. In some cases, a shop will replace both front axles (paired) to ensure balanced wear and performance.
Conclusion
In short, the cost to replace a CV axle on a 2007 Honda Accord varies widely. Expect parts to range from about $60 to $260 per axle, with labor adding roughly $100 to $250 per axle. The total installed price commonly falls between $260 and $510 per axle, depending on part choice, labor rates, and whether additional components must be serviced.
Summary
Bottom line: shop around and compare options — OEM, aftermarket, remanufactured, or used — and obtain a formal quote that itemizes part costs, labor, and any extra fees. Replacing front CV axles can improve ride quality and eliminate clicking noises, and doing both sides in a single visit can save time and ensure symmetry.