The 2.7 L EcoBoost typically uses a full-synthetic motor oil with a viscosity of 5W-30, and the engine’s oil capacity is generally around 6 quarts (about 5.7 liters) when changing the oil and filter. Always verify the exact specification for your year and model in the owner's manual or with a Ford dealership.
Oil type and viscosity
The EcoBoost family often requires a high-quality synthetic oil. While 5W-30 is the default for many 2.7 L EcoBoost engines, some years or climates may call for alternative viscosities. Always confirm the exact grade for your vehicle.
Common options
- 5W-30 synthetic — the most frequently recommended viscosity for modern 2.7 L EcoBoost engines.
- 5W-20 synthetic — may be specified for certain older model years or specific climate conditions; verify in your manual.
- Other grades — only if Ford specifies them for your exact year and usage; do not substitute without confirmation.
Always rely on the official specification for your car to ensure proper lubrication, performance, and warranty coverage.
Oil capacity and maintenance notes
Knowing the correct fill amount helps ensure a proper oil change. The typical capacity for a 2.7 L EcoBoost—including the filter change—is about 6 quarts (roughly 5.7 liters), though exact figures can vary slightly by model year and variant.
Capacity by variant
- Approximately 6 quarts (5.7 L) with a new filter for most 2.7 L EcoBoost engines in Ford trucks.
- Some year- or configuration-specific values may differ; consult the manual or service bulletin for your exact vehicle.
Use a quality synthetic motor oil and replace the oil filter at each change. If your vehicle has an oil-life economy gauge, reset it after servicing according to the owner's manual.
Practical tips for maintenance
To ensure you’re using the right oil and maintaining it properly:
- Check the owner’s manual or the oil fill cap for the recommended viscosity and specification.
- Choose a Ford-approved full-synthetic oil that meets the vehicle’s specification for EcoBoost engines.
- Adhere to the recommended oil-change interval based on climate and driving conditions; severe conditions may require more frequent changes.
Bottom line: For most 2.7 L EcoBoost applications, 5W-30 synthetic oil and about 6 quarts of oil is the standard starting point, with year- and climate-specific variations requiring verification.
Summary
In short, the 2.7 L EcoBoost generally takes 5W-30 full-synthetic motor oil, with an approximate capacity of 6 quarts (5.7 liters) including the filter. Always confirm the exact specification for your exact year and model in the owner’s manual or from a Ford dealership, and follow the recommended maintenance intervals to keep the turbocharged engine performing at its best.