Most Cadillac XTS models use a 24-inch driver-side blade and a 19-inch passenger-side blade. However, sizes can vary by model year and trim, so always verify for your exact vehicle.
The Cadillac XTS was produced from 2013 through 2019 as a full-size luxury sedan. While GM often standardizes blade lengths across a generation, some years or regional builds may use different lengths. This guide explains the typical sizes and shows how to confirm the correct fit for your specific car.
Common sizes for the Cadillac XTS
Below is a general guide to the sizes you’re most likely to encounter on XTS models. Because exact lengths can differ by year and market, use this as a starting point and verify before purchasing.
- Driver-side wiper blade: 24 inches
- Passenger-side wiper blade: 19 inches
These two lengths cover the majority of Cadillac XTS configurations produced between 2013 and 2019. If your vehicle uses different lengths, consult your owner's manual or the OEM parts diagram for your exact year and trim.
How to confirm the exact size for your XTS
To ensure you buy the correct blades, use one of the verification methods below. Getting the right sizes helps maintain optimal visibility and ensures a clean wipe across the windshield.
- Check the vehicle’s owner's manual or the wiper blade section in the GM parts catalog for your specific year and trim.
- Inspect the current blades for any size markings or numbers; some blades list their length on the blade housing or packaging.
- Measure the blade length directly if you remove one blade: measure from the center of the wiper arm where it mounts to the tip of the blade.
- Use an online compatibility tool at a reputable parts retailer: enter your year, make, model, and trim to confirm the recommended sizes.
- When in doubt, contact a Cadillac dealer or service center to confirm the exact specification for your vehicle.
Verifying through these steps helps account for any year-to-year variation or regional differences that may affect blade length requirements.
Summary
For most Cadillac XTS models, the standard blade sizes are a 24-inch driver-side blade and a 19-inch passenger-side blade. Always confirm with your specific year and trim using the owner’s manual, OEM diagrams, or a trusted parts retailer to ensure you get the correct fit.