The 2020 Altima 2.5 L uses 0W-20 full-synthetic motor oil, with a capacity of about 4.7 quarts (4.4 liters) including the filter.
Understanding the exact grade and quantity helps protect the engine, maintain efficiency, and stay within warranty. Here’s a concise guide to the official specification and practical notes for this model year.
Oil specification and capacity
Official specs for the 2.5 L engine in the 2020 Altima cover oil type, viscosity, and total capacity with filter change.
- Oil type: Full synthetic motor oil
- Viscosity: 0W-20
- Capacity: Approximately 4.7 quarts (4.4 liters) with filter
- API/ILSAC specs: API SN or higher; ILSAC GF-5 or GF-6 compatible
Note: Always consult the owner's manual for the exact specification for your VIN and climate, as Nissan may update recommendations.
Where to verify and how to apply
For the most accurate guidance, refer to the official owner’s manual or a Nissan dealership. The manual lists the required grade, capacity, and service intervals, and service centers can confirm any model-specific deviations.
Practically, when you perform an oil change, use the correct oil grade, replace the filter, and reset the maintenance light if applicable. Use a trusted brand and ensure the oil is certified and within the specified grade.
Summary
In a nutshell, the 2020 Nissan Altima 2.5 L uses 0W-20 full synthetic oil, with a capacity around 4.7 quarts (4.4 liters) including a filter. Verify against the owner's manual for your exact vehicle and climate, and follow proper oil-change procedures for optimum engine health.