For a 2014 Honda Accord, rim sizes range from 16 to 18 inches depending on trim: LX uses 16-inch wheels, EX/EX-L use 17-inch wheels, and Touring uses 18-inch wheels. The common bolt pattern is 5x114.3 mm with a center bore of 64.1 mm.
This article explains the official factory sizes for the 2014 Accord, outlines key fit considerations for aftermarket rims, and provides guidance to help you choose rims that maintain proper fit, safety, and performance.
Factory sizes by trim
Below are the typical stock wheel sizes associated with each trim level for the US-spec 2014 Accord. These values are useful as a baseline when shopping for replacements or upgrades.
- LX: 16x6.5 inches with 205/65R16 tires
- EX and EX-L: 17x7.5 inches with 235/45R17 tires
- Touring: 18x8 inches with 235/45R18 tires
When upgrading, remember that wheel width and offset influence clearance with suspension components, fenders, and brake calipers. Always verify fitment for your specific vehicle and tire choice.
Key fitment specs to know
Before choosing aftermarket rims, these specifications are essential to ensure a safe and correct fit. The following list captures the core requirements you’ll encounter.
- Bolt pattern: 5x114.3 mm
- Hub bore: 64.1 mm (hub-centric rings may be needed for wheels with a larger bore)
- Center bore and lug engagement: ensure proper hub alignment and secure lug nuts (usually M12x1.5 bolts on these wheels)
- Recommended offsets: roughly +40 to +55 mm depending on trim and wheel width; consult a fitment calculator or wheel specialist for exact numbers
- Common aftermarket widths and diameters: 16x6.5–7.0, 17x7.5, and 18x8 are typical options that fit without modifying suspension or brakes
These specs help prevent rubbing, clearance issues, or incorrect brake caliper contact. If you plan to push beyond stock sizes, professional alignment and potentially fender or brake modifications may be required.
Aftermarket considerations and tips
When shopping for rims outside the factory options, keep these tips in mind to maximize safety and performance:
- Stick to the 5x114.3 bolt pattern and verify the center bore or use hub-centric rings to improve fit and balance.
- Check the offset and width to avoid rubbing on the inner wheel well or fenders, especially with lower-profile tires.
- Confirm tire size compatibility with your chosen wheel size to maintain overall diameter and speedometer accuracy.
- Consult a trusted tire shop or Honda specialist for VIN-specific guidance if you’re unsure about exact fitment for your car’s trim and production date.
With careful selection, you can upgrade to a look you prefer while preserving safety and expected handling characteristics.
Summary
The 2014 Honda Accord offers factory rim sizes of 16 inches (LX), 17 inches (EX/EX-L), and 18 inches (Touring). Key fit details include a 5x114.3 mm bolt pattern, a 64.1 mm center bore, and typical offsets that vary by trim. When upgrading, verify exact clearance and compatibility for your specific vehicle and consider professional advice to ensure a safe, balanced ride.
Overall, if you keep to the stock sizes by trim or work with a qualified shop for aftermarket upgrades, you can maintain proper fitment and performance while achieving the look you want.