The 2017 Lincoln MKX with the 3.7-liter V6 uses 5W-20 synthetic motor oil.
For best results, use a full synthetic motor oil that meets Ford specification WSS-M2C946-A (or the current equivalent). The engine holds roughly 5 quarts of oil with a filter. While 5W-30 can be used in extreme heat, 5W-20 is the standard recommendation listed in most owner manuals for this engine.
Oil specifications and capacity
Key details about viscosity, capacity, and filtration are summarized below to guide your oil choice and replacement.
- Viscosity: 5W-20 synthetic motor oil (full synthetic preferred).
- Specification: Meets Ford specification WSS-M2C946-A (or the current equivalent for your model year).
- Capacity: Approximately 5 quarts (4.7 L) of oil with a filter change.
- Oil filter: Use a compatible filter (e.g., Motorcraft or equivalent); ensure proper torque and sealing.
In short, choose a 5W-20 synthetic oil that adheres to Ford's current specification and budget about five quarts to complete an oil change with a new filter.
Temperature considerations and service reminders
In regular to moderate climates, 5W-20 synthetic is the standard recommendation. In very hot climates or heavy-duty driving, some owners opt for a thicker grade, but this should be confirmed with the owner's manual or a dealership service advisor. Regular oil changes using the correct spec help protect the 3.7-liter V6 Ti-VCT engine and maintain performance.
Where to verify the exact specification
Always check the 2017 MKX Owner's Manual or the under-hood oil specification decal for the precise Ford specification and any updates for your vehicle. The dealership service department can also confirm the correct oil grade and capacity for your specific VIN, especially if there have been any service-customer updates since manufacture.
Summary
The 2017 Lincoln MKX 3.7L requires 5W-20 synthetic motor oil that meets Ford's specification (WSS-M2C946-A or current equivalent). The engine holds about five quarts with filter, and a full-synthetic oil is recommended for optimal protection and performance. Always verify the exact spec in your owner's manual or with a service professional, and use a compatible oil filter.
What kind of oil does a 2017 Lincoln MKX use?
5W-20
Oil Grade: SEO18
| Viscosity: | 5W-20 (Above -29°C) |
|---|---|
| Capacity: | 6 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
How much oil does a 2017 Lincoln 3.7 take?
6 quarts
Engine Oil
Capacity: 6 quarts (with filter). After refill check oil level.
What kind of oil does a 3.7 L V-6 take?
SAE 5W-20
Capacities and Specifications - 3.7L
| Name | Specification |
|---|---|
| Recommended motor oil (U.S.): Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP | WSS-M2C945-A |
| Recommended motor oil (Canada): Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 | WSS-M2C945-A |
What kind of oil does a Lincoln MKX 3.7 take?
-6 quarts full synthetic genuine Motorcraft engine oil 5w20. Full Synthetic. Genuine Motorcraft.