The 2006 Honda Accord uses a 5-lug bolt pattern on a 114.3 mm bolt circle (often listed as 5x114.3 or 5x4.5 inches).
In this article, you’ll find a clear explanation of the lug pattern for the 2006 Accord, what that means when shopping for wheels, and what additional measurements to verify to ensure proper fit across trims and aftermarket options.
Bolt pattern details for the 2006 Accord
Before you buy wheels or tires, note the key specifications and considerations that affect fitment and safety:
- Bolt pattern: 5x114.3 mm (5 on 4.5 inches)
- Center bore: 64.1 mm. If the wheel center bore is larger, hub-centric rings may be used; if smaller, the wheel may not center properly on the hub.
- Wheel size compatibility: Common options span roughly 15–17 inches in diameter, depending on trim and brake clearance. Always verify brake caliper clearance and offset for your specific model.
In summary, match wheels to the 5x114.3 bolt pattern and confirm center bore and offset compatibility with your 2006 Accord’s trim level and braking setup.
Compatibility and cross-model notes
Some other Honda models from the same era and certain other makes use the same bolt pattern, which can offer aftermarket wheel options. However, always verify center bore, offset, and brake clearance for your particular trim and wheel model to ensure proper fit and safety.
Summary: The 2006 Honda Accord uses a 5x114.3 mm bolt pattern with a 64.1 mm center bore. When selecting wheels, ensure the pattern, bore, and offset fit your specific trim and braking system.