The 2005 Honda Accord uses a five-lug bolt pattern of 114.3 mm (5x114.3).
The 2005 Accord, part of the 2003–2007 seventh generation in North America, typically uses the 5x114.3 bolt circle found on most wheels designed for that generation. When replacing wheels, confirm the pattern is 5x114.3 mm, the center bore is 64.1 mm, and the lug nuts are M12x1.5 with a 60-degree conical seat. Variations can occur by market or trim, so always verify exact specifications on your vehicle’s plate or owner’s manual.
Key specifications to know
Below is a concise breakdown of the core compatibility specs you should verify when shopping for wheels or replacements.
- Bolt pattern: 5x114.3 mm (five lug holes on a 114.3 mm circle)
- Center bore: 64.1 mm
- Lug nut size and seat: M12x1.5 with a 60-degree conical seat
- Number of lugs: 5
Knowing these details helps ensure that wheels, adapters, or rings will seat properly and safely on a 2005 Accord.
Notes for wheel replacements
When you buy aftermarket or used wheels, double-check the bolt pattern, center bore, and lug nut specs. If the center bore is larger than your hub, you may need hub-centric rings to achieve proper alignment and balance. If the center bore is smaller, the wheel will not fit without modification.
Summary
The 2005 Honda Accord uses a 5x114.3 mm lug pattern with a 64.1 mm center bore. This pattern is standard for most wheels intended for this generation, so verify these specs when selecting replacements to ensure proper fit and safe driving.