The Ford Five Hundred typically requires 5W-20 motor oil, in either a synthetic-blend or full-synthetic formulation. Always check the specific year and engine in the owner's manual to confirm the exact specification and capacity.
The Five Hundred was produced in the mid-2000s with a 3.0-liter Duratec V6 in most trims. Ford’s general guidance for this engine has been 5W-20 oil, chosen to balance protection, fuel economy, and cold-weather performance. Climate, driving style, and warranty terms can influence the final choice, so the official manual is your best reference.
In some markets or conditions, the manual may allow 5W-30, but this should only be used if explicitly approved by Ford for your vehicle. If you’re unsure, consult a dealer or Ford’s official service information for your VIN.
Oil options that meet Ford's spec
Here are the oil options that align with Ford's typical specification for the Five Hundred's V6 engines.
- 5W-20 synthetic-blend
- 5W-20 full synthetic
- 5W-30 (only if your owner's manual explicitly allows it)
Choosing the recommended grade helps maintain proper oil flow, lubrication, and engine protection across seasons and driving conditions.
Practical maintenance guidance
To keep the engine in good health, follow Ford’s oil-change intervals and ensure the oil you buy matches the grade specified for your climate and driving patterns. Look for oil that meets ILSAC certification and any Ford-specific standards noted on the bottle. The typical capacity for a Five Hundred’s V6 is roughly five to six quarts, depending on the exact engine and whether the filter is replaced.
Always recycle used oil properly and, if you’re unsure about the correct grade or capacity for your vehicle, seek professional service.
Summary
For most Ford Five Hundred models, 5W-20 is the standard oil grade, with synthetic-blend or full-synthetic formulations recommended. Verify the exact specification and capacity for your year and engine in the owner's manual, and be aware that 5W-30 may be permitted only if explicitly approved. Regular oil changes using the correct oil help keep the 3.0L Duratec V6 running smoothly.
What oil does a 2007 Ford 500 take?
Oil Grade: SEO15
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 6 quarts (with filter). After refill check oil level. |
| Torque: | 19 ft/lbs (Oil Drain Plug) |
What motor oil does a Ford 500 take?
Castrol – GTX High Mileage 5W-20 Synthetic Blend Engine Oil, Protects Against Sludge, 5 Quart (Part No. 1597C4)
Does it matter if you use 5W-20 or 5W-30?
Imagine honey versus pancake syrup to visualize high vs. low viscosity. Since 5W-30 is thicker than 5W-20, it has a higher viscosity. In engines, that can mean greater protection because the lubrication layer is thicker, making it more effective for preventing metal-on-metal contact.
What oil does the IS500 take?
5w30
2022-2024 Lexus IS500 5.0L V8. - 10Qts Genuine LexusEngine Oil 5w30.