The 2026 Honda Passport takes 0W-20 full synthetic engine oil that meets ILSAC GF-6 (or newer) and API SN or higher standards.
Powered by a 3.5-liter V6, the Passport uses about 5.7 quarts of oil with a filter per change, and oil life is monitored by Honda’s Maintenance Minder system to determine replacement intervals. Always consult the owner’s manual or dealer for your exact specification, as regional differences can apply.
Oil Type and Viscosity
To help owners navigate the oil options, here is the essential spec you need for the Passport’s 3.5-liter V6.
- Viscosity: 0W-20
- Oil type: full synthetic
- Standards: ILSAC GF-6 (or newer) and API SN or higher
- Brand/source: Honda Genuine oil or any reputable brand that meets the above specs
Using 0W-20 full synthetic oil that meets GF-6/API SN or higher is standard across the Passport lineup for optimal cold-weather performance, fuel economy, and engine protection. Always verify that the product you buy carries the GF-6 certification and is rated for API SN or higher.
Maintenance, Capacity and Intervals
In addition to the oil grade, knowing how much oil the engine holds and when to change it is part of routine maintenance.
- Capacity: approximately 5.7 quarts (with filter) for a full oil change on the 3.5L V6
- Change intervals: rely on Honda’s Maintenance Minder system; typical normal-driving intervals are around 7,500 miles, with shorter intervals under severe driving conditions
- Oil filter: replace with every oil change
Always refer to the Maintenance Minder and the owner’s manual for exact interval timing and capacity, as variations can occur by market, trim, or climate.
Brand and Sourcing Tips
Which oil to buy is as important as how much to pour. Choose a reputable brand that offers 0W-20 full synthetic oil meeting GF-6 and API SN or higher, such as Honda Genuine oil or another major brand that explicitly states GF-6 compatibility. When in doubt, ask a dealer or read the latest owner’s manual for approved specifications.
Summary
For the 2026 Honda Passport, use 0W-20 full-synthetic engine oil that meets ILSAC GF-6 (or newer) and API SN or higher. The engine holds roughly 5.7 quarts with a filter, and the Maintenance Minder system will guide changes, typically around 7,500 miles under normal conditions. Use the recommended viscosity and standards to maintain performance, efficiency, and warranty support.