The 2013 Ford Edge V6 requires 5W-20 motor oil, preferably a full-synthetic formulation, and uses about 5 quarts of oil during a standard oil change. This guidance applies to the 3.5L V6 Ti-VCT engine that powered that model year Edge.
In practice, owners should consult the vehicle’s owner’s manual or the oil-life monitoring system for exact specifications and service intervals, as climate, driving habits, and maintenance history can influence the recommended oil type and change frequency.
Recommended oil grade and type
Ford’s guidance for the 3.5L V6 in the 2013 Edge is to use 5W-20 motor oil. The preferred option is a full synthetic 5W-20; a synthetic blend is acceptable if full synthetic is unavailable. This combination helps ensure proper lubrication, fuel economy, and engine protection across temperatures.
- 5W-20 full synthetic motor oil
- 5W-20 synthetic blend (acceptable if full synthetic is unavailable)
Using the recommended 5W-20 oil supports optimal performance and longevity of the engine, particularly during cold starts and temperature extremes.
Oil capacity and service notes
Capacity and service intervals: The 3.5L V6 in the Edge typically holds about 5 quarts (4.7 L) of oil with a filter change. Use a new oil filter and the correct drain-plug gasket at each oil change. Follow the maintenance minder or owner’s manual for the recommended oil-change interval, which can vary based on driving conditions and oil type.
- Capacity: approximately 5 quarts (4.7 L) with filter
- Replace the oil filter at every change
- Consult the maintenance minder or manual for the exact interval
Adhering to the correct capacity and interval helps ensure consistent lubrication and engine protection across mileage and operating conditions.
Additional considerations
Climate and driving conditions
In very hot climates or when towing, some owners or service guides may suggest consulting the manual for any permitted viscosity adjustments. However, 5W-20 is the standard recommendation for the 2013 Edge V6 in most conditions. If you anticipate extreme usage, verify with a Ford dealer or the owner’s manual for any exceptions.
For most drivers, sticking with 5W-20 (preferably full synthetic) provides the best balance of protection, performance, and fuel economy.
Summary
To service a 2013 Ford Edge V6, use 5W-20 motor oil—ideally full synthetic—with an approximate capacity of 5 quarts plus a new filter. Follow the owner’s manual or the vehicle’s maintenance minder for the exact oil-change interval, and adjust if you operate under unusual climate or towing conditions. Regularly verify oil level and quality to maintain engine health and performance.
How to make a Ford Edge faster?
Chiptuning enhances your Ford Edge's horsepower and torque, making it more responsive and dynamic. You'll notice improved acceleration and overall performance, along with better fuel efficiency. It's a win-win for power and economy!
Can I use 5w30 instead of 5w20 in my Ford Edge?
The only reason Ford uses 5w20 in the Edge 3.5 is for fuel efficiency as per EPA. Move to 5w30 for better protection of your motor. My 2010 Ford F150 with the 5.4, and the wife's 2018 Edge 3.5 both call for 5w20. Both running 5w30 after warranty as per Ford Tech recommendation.
What coolant do I need for a 2013 Ford Edge?
Prestone – Antifreeze & Coolant: 50/50 Ready-to-Use, Dex-Cool Compatible, 1 Gallon (Part No. AF850)
What oil does a 2013 Ford Edge V6 take?
6 quarts genuine Full Synthetic Motorcraft engine oil 5 w20. Ford Edge 3.5L V6.