The 2010 Acura TL uses SAE 5W-20 synthetic motor oil. It should meet API SN or newer and ILSAC GF-5 or newer, with Acura Genuine Motor Oil or an equivalent brand recommended by Acura. This ensures optimal protection for the V6 engine and best fuel efficiency.
Oil specifications for the 2010 TL
The TL’s 3.5-liter V6 is designed to run on a 5W-20 viscosity oil that is synthetic (full synthetic preferred) and meets the API SN and ILSAC GF-5 standards. Using an oil that meets or exceeds these specs helps with cold starts, deposits control, and overall engine longevity. Acura generally recommends using Acura Genuine Motor Oil or an equivalent synthetic that meets these certifications.
Consult the owner's manual or a dealer for the exact specification for your vehicle, especially if you live in extreme temperatures or have unique driving conditions. These sources will confirm the approved viscosity and oil specification for your VIN.
Key considerations to keep in mind include oil viscosity, certification, and the quality of the brand. The following list highlights the essential points.
Before maintaining the vehicle, it’s helpful to know the core oil requirements at a glance:
- Viscosity: SAE 5W-20
- Oil type: Synthetic (or synthetic blend) engine oil
- Certifications: API SN (or newer) and ILSAC GF-5 (or newer)
- Brand alignment: Acura Genuine Motor Oil or an equivalent meeting the above specs
In short, the TL’s oil specification centers on using a 5W-20 synthetic oil that meets API SN and ILSAC GF-5 standards, with a preference for Acura’s own branded oil or an equivalent that meets those specifications.
Practical oil-change guidance
When performing or scheduling oil changes, follow these general guidelines to ensure you maintain the engine’s protection and performance.
It’s important to verify the suggested interval and capacity in your manual, as the exact change interval can vary based on driving conditions and oil type. Synthetic oil typically allows longer intervals than conventional oil.
Oil-change intervals and monitoring
With synthetic 5W-20 oil, many owners follow a 7,500-mile (12-month) interval, though severe driving conditions (extreme temperatures, frequent short trips, or heavy towing) may necessitate more frequent changes. Always refer to the vehicle’s maintenance schedule for precise guidance.
For buying decisions, use a reputable brand that clearly lists API SN and GF-5 compatibility on the label, and ensure the product meets or exceeds those standards.
Summary
The 2010 Acura TL requires 5W-20 synthetic oil that meets API SN and ILSAC GF-5 standards. Use Acura Genuine Motor Oil or an equivalent product that meets these specs, and follow the maintenance schedule in your owner's manual for changes and intervals. This combination supports optimal engine protection, efficiency, and longevity for the TL’s V6 powerplant.