The correct rear wiper blade size for a 2016 Kia Sedona is 11 inches in length.
This article explains how that size is determined, how to confirm it on your specific vehicle, and practical tips for replacement and shopping options.
Confirming the size
To confirm the right size for your Sedona, use these reliable checks and measurements:
- Consult the owner’s manual; maintenance sections or wiper blade charts usually list the rear blade size.
- Check the packaging on an 11-inch replacement blade or the blade itself, which often marks the size (11" or 280 mm).
- Measure the blade directly on the vehicle by measuring from the base where it attaches to the wiper arm to the tip of the blade.
In practice, these checks typically confirm an 11-inch rear blade for the 2016 Sedona; if the measurement differs, adapt accordingly.
Replacing the rear wiper blade
Replacing the rear blade is a straightforward task that most DIYers can handle with basic tools. Before you start, gather the replacement blade and a small screwdriver if your design requires releasing a retaining tab.
- Lift the rear wiper arm away from the window until it stays in a raised position.
- Remove the old blade by releasing the connector or tab that holds it to the wiper arm; this may involve sliding, pressing a release button, or rotating a small locking piece.
- Attach the new blade to the wiper arm by inserting it into the connector until you hear a click or feel it lock securely.
- Carefully lower the arm back to the glass and test the wiper to ensure full contact and proper operation.
With the correct 11-inch blade installed, the Sedona rear window should wipe cleanly; consider checking for any streaks and replacing wipers if performance declines.
OEM vs aftermarket considerations
When shopping, you’ll find OEM Kia blades as well as aftermarket options from brands like Bosch, Valeo, or other reputable manufacturers. Most retailers list the rear blade size as 11 inches for the 2016 Sedona, but always verify compatibility with your exact market and trim before purchase.
Summary: For the 2016 Kia Sedona, use an 11-inch rear wiper blade. Confirm with your manual or by measuring, and replace using the standard steps outlined above. Regular replacement helps maintain visibility and safety on the road.