The right oil filter is essential for protecting the 3.5-liter V6 that powers the 2008 Honda Odyssey. For this model, use a standard spin-on oil filter designed for the J35 engine. The most commonly used OEM part numbers are 15400-PLM-A02, with 15400-PLM-A01 as another production-variant option. If you’re unsure, compare with the filter you remove or consult a dealer to confirm the correct fit for your VIN.
OEM oil filter part numbers
Common Honda factory options
The following Honda-approved part numbers cover the typical 2008 Odyssey equipped with the 3.5L V6. Availability can vary by production date and region, so it’s wise to double-check against your existing filter or by VIN.
- 15400-PLM-A02
- 15400-PLM-A01
Manufacturers often change part numbers across model years and production runs, so when in doubt, verify with a parts counter using your VIN or the number stamped on your current filter. This ensures you get a filter that seals correctly and maintains proper oil flow.
Quality aftermarket options
Brands that commonly fit the 3.5L Odyssey engine
Many reputable aftermarket brands offer filters that fit the Honda 3.5L V6. When shopping aftermarket, confirm thread size, gasket type, and overall dimensions to ensure a proper seal and fit in the housing.
- Wix
- Bosch
- Fram
- Purolator
Aftermarket filters can be cost-effective and readily available from auto parts stores and online retailers. Always compare the specific filter model to the OEM requirements and read user reviews or cross-reference guides to confirm compatibility with the 2008 Odyssey’s J35 engine.
Installation and maintenance tips
Whether you choose an OEM part or an aftermarket alternative, follow these best practices for a clean and reliable change:
- Drain the old oil completely and replace the oil drain washer if applicable.
- Apply a thin film of clean oil to the gasket on the new filter before installation.
- Tighten the filter by hand until snug, then give it about a 3/4 turn (do not overtighten).
- Check for leaks after adding fresh oil and starting the engine.
Regular filter changes, in line with Honda’s recommended maintenance intervals, help maintain oil pressure and engine longevity. If you’re uncertain about the correct part number or installation torque, consulting a dealer or a qualified mechanic is a prudent step.
Summary
For the 2008 Honda Odyssey, the safest choice is a Honda OEM oil filter designed for the 3.5L V6 (J35 engine), with common part numbers 15400-PLM-A02 and 15400-PLM-A01. If you opt for aftermarket, select brands like Wix, Bosch, Fram, or Purolator, and verify compatibility with your VIN and the exact filter specifications. Correct installation and timely changes keep the engine protected and running smoothly.