What kind of oil does a 2007 Mitsubishi Eclipse take?

The 2007 Mitsubishi Eclipse generally uses 5W-30 engine oil, preferably full synthetic or synthetic blend, meeting API SN or newer and ILSAC GF-5 standards. The engine oil capacity is about 4 quarts with a filter. Always check the owner's manual for exact specification and any model-specific notes.

Oil grade and standards

Below is a concise guide to the standard oil grade and the industry standards you should look for when buying oil for a 2007 Eclipse.

• 5W-30 synthetic or synthetic-blend engine oil that meets API SN or newer and ILSAC GF-5 (or newer) specifications.

Note: If your vehicle has any factory updates or operates in extreme climate conditions, always confirm the exact specification with the owner's manual or a Mitsubishi service advisor.

Oil capacity and service notes

These figures help plan an oil change, including how much oil to purchase and how to perform a top-up if needed.

• Oil capacity (with filter change): approximately 4.0 quarts (about 3.8 liters).


• After an oil change, verify the level with the dipstick and add small amounts to reach the correct mark, if necessary.

Use a genuine filter and follow proper disposal guidelines for used oil. If you’re unsure about the exact capacity for your specific trim, consult the owner's manual or a Mitsubishi technician.

Oil change how-to (quick guide)

These steps outline a typical oil-change process for a 2007 Eclipse to ensure you use the recommended oil correctly.

1. Warm up the engine briefly, then turn off and safely support the vehicle on jack stands if you’re lifting it.


2. Drain the old oil by removing the drain plug and allow it to fully drain into a suitable container.


3. Replace the oil filter with a new, compatible filter.


4. Reinstall the drain plug and top up with the recommended 5W-30 oil, adding roughly 4 quarts to start.


5. Start the engine, check for leaks, and recheck the oil level with the dipstick, topping up as needed.

Dispose of old oil at a proper recycling facility and reset maintenance reminders if applicable.

Summary

For a 2007 Mitsubishi Eclipse, use 5W-30 engine oil, preferably synthetic or synthetic blend, meeting API SN or newer and ILSAC GF-5 standards. The typical oil capacity is about 4 quarts with a filter, but always confirm the exact specification in the owner's manual for your trim and climate. Regularly check the oil level after changes and follow proper disposal practices for used oil.

Is 5W-30 good for my car?

5w30 motor oil's ability to function in a large variety of engine types and under a wide range of temperature conditions makes it incredibly versatile. Whether you have a light-duty petrol or diesel engine, 5w30 is often the suggested motor oil to use because it flows more easily in winter temperatures.

How much does it cost to replace spark plugs in a Mitsubishi Eclipse?

The average cost for a Mitsubishi Eclipse Spark Plug Replacement is between $145 and $226. Labor costs are estimated between $116 and $170 while parts are priced between $30 and $57. This range does not include taxes and fees, and does not factor in your unique location.

What oil goes in a Mitsubishi Eclipse?

The engine is designed to work with low‑viscosity oils for optimal lubrication. Even in hot climates, Mitsubishi continues to suggest 0W‑20. If 0W‑20 is not available, the next suitable alternative is typically 5W‑30 full synthetic, rather than 10W‑30.

What oil does a 2007 Mitsubishi Eclipse use?

2007 Mitsubishi Eclipse Spyder technical and mechanical specifications