Yes. The maintenance-required light on a Toyota Camry can be reset after service, typically using the ignition along with the trip/odometer button on older Camry models, or through the vehicle’s settings menu on newer Camrys with a digital display.
Quick reset for most Camry models
This method relies on the traditional odometer/trip meter reset button that appears on many Camry dashboards. It is the standard approach for mid-2000s to early-2010s Camry models and some later trims that still use a physical trip knob.
- Turn the ignition to ON with the engine off.
- Rotate the trip meter/odometer selector until you see ODO or TRIP A on the display.
- Turn the ignition OFF.
- Press and hold the trip meter reset knob, then turn the ignition to ON while continuing to hold the knob.
- Keep holding until the display returns to the standard odometer reading (or the wrench/maintenance light disappears), then release.
If the light does not reset after these steps, turn the ignition OFF and try again, ensuring you keep the reset button pressed as you re-energize the system. If it still won’t reset, the vehicle may require a service reset by a dealer or service technician.
Reset on newer Camry models with a digital dash (MID)
For Camry models with a digital instrument cluster and a multi-information display (MID), the maintenance reset is usually done through the settings or maintenance menu rather than a physical trip knob.
- Turn the ignition to ON, but do not start the engine.
- Use the steering wheel controls to access the vehicle’s settings or maintenance menu on the MID screen (this may be labeled as Vehicle Settings, Maintenance, or similar).
- Navigate to Maintenance or Maintenance Reset, then select Reset (or Confirm) to clear the reminder.
- Return to the main display; the maintenance wrench icon should disappear or the light should stop flashing.
Note that exact wording and menu paths can vary by model year and trim. If you don’t see a Maintenance Reset option, consult the owner’s manual for the precise steps for your Camry generation, or contact a Toyota service center for assistance.
Important cautions and tips
Resetting the maintenance light should be done only after you have completed the scheduled service. Using the reset to hide overdue maintenance can lead to missed services and potential issues with your vehicle’s upkeep. If the light reappears after a reset, it may indicate that the service was not completed or that another maintenance item is now due. In such cases, consult your dealership or a trusted mechanic to verify and address the required service.
How to verify that the reset worked
After performing the reset, start the car or turn the ignition off and back on to confirm the light remains off. For MID-based resets, ensure the wrench icon or maintenance reminder no longer appears on the display. If the light returns after a short drive, you may need to recheck the service items in your maintenance schedule or seek professional assistance.
Summary
Resetting the Camry’s Maintenance Required light is a straightforward two-path process: use the traditional odometer/trip button method on older models, or use the vehicle’s MID/settings menu on newer models. Always ensure that maintenance has actually been performed before resetting, and refer to your owner’s manual for model-specific steps. If in doubt, contact a Toyota service center for guidance.
How to reset maintenance required light on Toyota with push button start?
Go ahead and toggle through till you get to trip A then turn it back off now hold down the trip button. As you Push the engine start stop push it twice. You'll see this blink. And you're good to go.
How to clear maintenance required message on Toyota Camry?
Until you reach vehicle settings. Press okay from here You will find the scheduled maintenance press okay and it will ask you if you want to reset the data. Choose yes and reset is now complete.
How to reset maintenance required light 2013 Toyota Camry?
Now it's flashing zeros release the trip button there turn your key. Off turn it back on. Again. Start the engine.
How to reset maintenance required light on a 2012 Toyota Camry?
And now you can see it's resetting just hold it. Until. Those little things blink. And there you go that's how you reset.