The 2020 Dodge Journey typically uses H11 bulbs for the low-beam headlights and 9005 bulbs for the high-beam headlights; if the vehicle is equipped with fog lights, those commonly use H11 as well.
In this article, we outline the bulb types for the Journey’s primary headlights, note any trim-related variations, and provide practical guidance for replacement.
Headlight bulb types by function
The following list identifies the bulb types used for the main headlights on most 2020 Journey models.
- Low-beam headlights: H11
- High-beam headlights: 9005 (HB3)
- Fog lights (if equipped): H11
Bulb replacements should be matched to your specific vehicle’s trim and production date; always consult the owner's manual or your dealer if there is any doubt about the correct bulb type.
Variations by trim and region
Some markets or late-production runs may exhibit different bulb configurations, especially for fog lights or projector setups. Always verify the exact bulb specification for your VIN-based build sheet or by inspecting the ballast/connector on the headlight assembly.
Replacing headlight bulbs safely
If you’re planning a DIY bulb swap, follow these general steps. They cover common halogen setups used on the 2020 Journey; refer to the manual for model-specific nuances.
- Park on a flat surface, set the parking brake, and ensure the engine is off and the headlights are cool to prevent burns.
- Open the hood and locate the back of the headlight assembly. Remove any dust cover or access panel to reach the bulb housing.
- Disconnect the electrical connector from the bulb by gently pulling straight back or releasing the retaining tab as required.
- Release the bulb from its socket by twisting counterclockwise (or by unclipping a retaining ring, depending on the design) and carefully remove it.
- Handle the new bulb by its base; avoid touching the glass with bare fingers. If contact occurs, wipe the glass with clean alcohol to remove oils.
- Insert the new bulb into the socket, secure it (twist or clip as designed), reconnect the wiring, and replace any covers.
- Test the headlights by turning on low and high beams to confirm proper operation before driving.
Note: If your Journey uses HID or LED headlights, or if you encounter a stubborn bulb, consult a dealership or certified technician to prevent damage to the electrical system or headlight housing.
Summary
The 2020 Dodge Journey generally uses H11 bulbs for low beams, 9005 bulbs for high beams, and H11 for fog lights where equipped. Variations can occur by trim, region, or production batch, so it’s wise to confirm with the owner's manual or a dealer. For bulb changes, follow standard safety steps and consult a professional if you’re unsure about the process.
What year to stay away from Dodge Journey?
Q: Which Dodge Journeys should potential buyers be wary of when considering a used vehicle? A: If you're in the market for a used Dodge Journey, avoid the 2009, 2010, 2011, and 2012 model years. These particular years have been identified as the most problematic.
How to change headlight bulb on 2020 Dodge Journey?
Okay like that and pull it out. Okay we'll grab the new bulb. And we'll show you how to put it together. Now. So we get the new bulb guys okay all we have to do get it in the slots.
Do I need H11 or 9005?
H11 bulbs are designed for use as low beam headlights, while 9005 bulbs are typically used for high beams. This results in a higher brightness level for the 9005 bulbs compared to the H11 bulbs.
Are H11 and 9005 the same bulb?
Difference between these bulbs will be the O-ring on the base. H11 on the left side will have a big pronounced O-ring on the base of the bulb versus the 9005.