Most 2012 Chrysler 200 models use H11 low-beam bulbs and 9005 high-beam bulbs for its halogen headlights; some trims may have optional HID headlights that use a different bulb type. Always verify the exact specification for your specific vehicle configuration.
Bulb types by headlight function
This quick guide outlines the typical bulb types used for the 2012 Chrysler 200’s main lighting functions. Variations can occur by trim level or market, so confirm with your manual or a parts professional if in doubt.
- Low-beam headlamps: H11 bulbs
- High-beam headlamps: 9005 bulbs
- Front fog lights: commonly H11 or H16 depending on trim; check your vehicle’s labeling or manual
Note: Some models may switch between different configurations, or offer optional HID headlights instead of halogen. If your car has HID, it uses ballast-based HID bulbs (such as D1S/D2S) rather than standard halogen bulbs. Always confirm via the owner’s manual or the headlamp housing label.
How to confirm the exact bulb type for your car
Because bulb configurations can vary by trim level and market, use these steps to confirm the correct bulb type for your specific car:
- Open the hood and locate the headlight assembly. Remove any access panels if needed.
- Carefully read the imprint on the bulb or the housing label, which lists the bulb type (e.g., H11, 9005).
- Consult the owner's manual or the official Chrysler parts site with your VIN to confirm the exact bulb type for your vehicle.
Alternatively, you can bring the vehicle to a dealer or auto parts retailer for a quick bulb-type check.
What to buy for a replacement kit
Here is a quick shopping guide for a typical 2012 Chrysler 200 halogen setup. If your car uses HID, bulbs and replacement approaches differ.
- Low-beam halogen bulbs: H11 (standard 55W class)
- High-beam halogen bulbs: 9005
- Fog light bulbs (if equipped): H11 or H16, depending on trim; verify before purchase
Important: When replacing headlights, avoid touching the glass of halogen bulbs with your fingers, as oils can shorten bulb life. Use gloves or a clean cloth.
What if your Chrysler 200 has HID or LED headlights?
Some 2012 Chrysler 200 models offered optional HID headlights. If your vehicle has HID, it uses HID bulbs (commonly D1S or D2S) and requires a ballast. LED headlights were not a factory standard on the 2012 200, though aftermarket LED retrofits exist. If you suspect HID, you’ll see a ballast along the wiring harness rather than a replaceable bulb in the headlamp housing.
Summary
For most 2012 Chrysler 200s, expect H11 low-beam and 9005 high-beam halogen bulbs, with fog lights commonly using H11 or H16 depending on trim. Some trims may have optional HID headlights (D1S/D2S) rather than halogens. Always confirm via the owner’s manual, the label on the headlight housing, or a dealer/parts retailer using your VIN. When replacing bulbs, handle them carefully and consider replacing in pairs where practical to maintain consistent brightness.