The Nissan Juke typically requires 0W-20 synthetic motor oil, though the exact specification can vary by engine and model year. Always verify the correct grade by checking the owner’s manual or the oil cap on your engine.
With multiple engines across different markets, including a non-turbo 1.6L and a turbocharged 1.6L DIG-T, Nissan has updated oil recommendations over time. This article outlines the typical specs and how to confirm the right oil for your specific Juke.
Oil recommendations by engine
Use this quick reference to identify the typical oil grade for common Juke configurations. Always confirm with official documentation for your vehicle.
Non-turbo 1.6L (HR16DE) Juke
The standard instruction for many markets is 0W-20 synthetic oil. In some climates or older variants, 5W-30 may be listed as an alternative; always verify with your manual or cap label.
- Oil grade and viscosity: 0W-20 synthetic
- Specification: API SN or newer; ILSAC GF-5 or newer (compatible with modern oils)
- Notes: Confirm via owner’s manual or engine cap
Conclusion: For the non-turbo Juke, 0W-20 synthetic is the prevalent recommendation, with regional variations possible.
Turbo 1.6L DIG-T Juke
The turbocharged DIG-T variant typically uses 0W-20 synthetic oil. Some markets or older model years may allow alternatives such as 5W-30; always check the official guidance for your vehicle.
- Oil grade and viscosity: 0W-20 synthetic
- Specification: API SN or newer; ILSAC GF-5 or newer
- Notes: Verify with manual or cap label for exact spec
Conclusion: 0W-20 is generally recommended for the DIG-T Juke, with potential regional allowances dependent on the model year.
How to verify the right oil for your Juke
To be sure you’re using the correct oil, check the owner’s manual, inspect the oil filler cap for the exact grade, and consider the engine code or VIN when looking up specifications.
- Find the official oil specification in the owner’s manual or Nissan’s service portal
- Check the engine code and model year; use dealer resources or a reputable spec finder if needed
- Follow the recommended grade and use high-quality synthetic oil; avoid mineral oils unless specifically allowed
Conclusion: Verifying the exact grade prevents improper lubrication and helps maintain warranty coverage.
Maintenance tips for oil changes
Regular oil changes with the correct oil type support engine health and efficiency. Nissan’s recommended intervals vary by climate and driving conditions, but synthetic oil often allows longer service gaps.
- Typical interval: Every 5,000–7,500 miles (8,000–12,000 km) for standard synthetic oils; more frequent if you operate in severe conditions
- Replace the oil filter with a genuine Nissan part or a high-quality equivalent at each change
- Reset maintenance reminders after service according to the owner's manual instructions
Conclusion: Adhering to the correct oil and timely changes is essential for long-term engine performance.
Summary
The Nissan Juke generally takes 0W-20 synthetic oil for most engines, including both non-turbo and turbo variants, though some markets or older models may list alternatives such as 5W-30. Always verify the exact grade via the owner’s manual or the oil-cap label, and follow Nissan’s maintenance schedule to ensure optimal performance and warranty protection.
Can I use 5W-40 in a Nissan Juke?
5 Litres 5w40 Synthetic Engine Oil For Service For Nissan Juke (F15) 1.2 DIG-T.
Ask about result
What oil is recommended for Nissan Juke?
Valvoline – High Mileage 5W-30 Full Synthetic Engine Oil, Prevents Leaks (Part No. 881169)
Ask about result
What kind of oil does a Nissan Juke take?
Maintenance and do-it-yourself” section to determine the proper refill capacity. 10-1/8 gal. 12-1/8 gal. If above engine oil is not available, use equivalent that matches the following grade and viscosity: Genuine “Nissan Motor Oil Synthetic Technology 5W-30 C3”.
Ask about result
What type of oil does a 3.5 L V6 take?
2.7L & 3.5L EcoBoost V6: 5W-30 synthetic.
Ask about result