The 2016 Dodge Journey uses a standard 12-volt automotive lead-acid battery; the most common OEM replacement size is Group Size 75 (also listed as H6) with about 730 cold-cranking amps, though exact specs vary by engine and trim. Always verify by checking the battery label or the owner's manual.
In practice, this means you’re looking for a conventional 12V battery that fits Group 75/H6 and delivers roughly 700–730 CCA with around 120–135 minutes of reserve capacity. The engine choice in your Journey (2.4L four-cylinder or 3.6L V6) can influence the precise CCA requirement, so confirm the exact specification for your vehicle before purchasing.
Battery basics for the 2016 Dodge Journey
Key specifications you’ll typically encounter when shopping for a replacement include the group size, CCA, and reserve capacity, along with whether the battery is a conventional flooded unit or an AGM option.
- Voltage: 12 volts
- Group size: 75 (H6)
- Typical cold-cranking amps (CCA): about 730 A
- Reserve capacity (RC): roughly 120–135 minutes
- Battery type: conventional flooded lead-acid is typical; AGM replacements are available as aftermarket or dealer options
- Fitment: designed to fit the Dodge Journey 2016 across most trims; verify dimensions and terminal layout for your specific car
With these basics in mind, you can look for a battery labeled Group 75/H6 and confirm CCA and RC to match your vehicle’s needs.
Choosing the right battery for your Journey 2016
Before shopping, know the key specs and fitment. The 2016 Journey generally uses a Group Size 75/H6, with around 730 CCA and a 120–135 minute RC, and the battery is typically a conventional flooded unit, though some setups may use AGM. Engine and trim can influence exact numbers; verify on your vehicle.
Brands and options to consider:
- OEM or Mopar-branded batteries sized 75/H6
- Reputable aftermarket options (ACDelco, Interstate Batteries, Bosch, Motorcraft, Delphi)
- Warranty, build quality, and date codes (avoid old stock)
When in doubt, consult your local dealer or a trusted auto parts retailer for a fitment that matches your VIN and the engine specification.
Installation and maintenance tips
Proper installation ensures reliability and safety. Follow these general steps and guidelines.
- Turn off the engine and remove the negative (-) terminal first, then the positive (+) terminal.
- Inspect battery tray and cables for corrosion; clean terminals if needed using a baking soda solution and a wire brush.
- Install the new battery, ensuring the hold-down clamp is secure and the terminals are clean and tight.
- Reconnect the positive terminal first, then the negative terminal, and start the engine to verify operation.
Regular maintenance, including cleaning terminals and checking the battery’s age (date code), helps prolong life and prevent unexpected failures.
Where to buy and how to verify
When shopping for a replacement, verify the exact specifications against your vehicle’s VIN and engine configuration. Look for the date code, warranty terms, and compatibility with your Journey’s electrical system.
- Shop at the dealer for OEM Mopar batteries or approved OEM equivalents
- Consider trusted aftermarket brands with a good warranty
- Verify date of manufacture and ensure the correct group size (75/H6) and CCA rating
Choosing a battery that matches the Journey’s requirements ensures reliable starting performance and long service life.
Summary
For a 2016 Dodge Journey, the standard battery is a 12-volt lead-acid unit, most commonly Group Size 75 (H6) with about 730 CCA and roughly 120–135 minutes RC. Engine and trim can influence the exact specs, so check the battery label or the owner’s manual to confirm the precise requirements. When replacing, select a battery that fits Group 75/H6 dimensions, provides the appropriate CCA, and, if desired, consider an AGM option for improved durability in demanding conditions. Regular maintenance and proper installation help ensure dependable starts and overall electrical system longevity.