The 4.7 liter V8 most commonly uses 5W-30 motor oil, with a typical capacity around 5.5 quarts (about 5.2 liters) when performing an oil and filter change. Always confirm the exact specification for your specific year and model in the owner's manual or under-hood labeling.
The 4.7 L V8 is a Chrysler/Jeep PowerTech engine found in several models (such as Grand Cherokee, Durango, Dakota, and Ram trucks). While the guidance below covers the standard setup, variations by year and vehicle can exist, so verifying the precise requirements for your car is essential. Oil choices can include conventional, synthetic-blend, or full synthetic oils, all meeting modern API and ILSAC standards.
Common oil specifications for the 4.7L PowerTech V8
Below are the typical guidelines used for most 4.7L PowerTech V8 applications. This list helps you understand the general expectations, but always double-check your vehicle’s manual for the exact specification.
- Viscosity: 5W-30 is the standard recommendation for most climates and model years; synthetic-blend or full synthetic 5W-30 is acceptable. In extremely hot climates, some owners opt for a higher-grade oil, but 5W-30 remains the typical baseline.
- Capacity: Approximately 5.5 quarts (about 5.2 liters) of oil with a new filter; some models may approach 6 quarts when drained and refilled. Do not overfill.
- Specifications: Use an oil that meets API SN (or newer) and ILSAC GF-5/6 standards. Mopar OE references (such as MS-6395) are commonly used as a compatibility benchmark, but any modern 5W-30 meeting API/SN and GF-5/6 is generally acceptable.
These guidelines offer a practical starting point for selecting oil, performing a change, and ensuring the engine is properly lubricated across most 4.7L PowerTech applications.
How to confirm the exact spec for your vehicle
Because there are multiple versions and model-year changes, verify the precise requirements for your car by following these steps:
- Consult the owner's manual and the maintenance schedule for the recommended viscosity and capacity.
- Check the under-hood label or oil fill cap for the official specification (some labels list the exact grade and capacity).
- If in doubt, contact a dealer or a qualified mechanic with your VIN to confirm the correct oil grade and capacity for your specific vehicle.
Using the right oil is essential for the longevity of the 4.7L V8. When in doubt, stick with a modern 5W-30 that meets API SN or newer and ILSAC GF-5/6, and follow the manual’s guidance on capacity and service intervals.
Summary
The 4.7 liter V8 commonly takes 5W-30 motor oil, with an approximate capacity of 5.5 quarts (about 5.2 liters) including the filter. While 5W-30 is standard, always verify the exact specification for your year and model in the owner's manual or on the under-hood labeling, and choose a quality oil that meets API SN (or newer) and ILSAC GF-5/6 standards.