The 2014 Honda Pilot requires SAE 5W-20 motor oil, which can be conventional, synthetic blend, or full synthetic as long as it meets API SN or newer and ILSAC GF-5 standards. The engine holds about 5.5 quarts of oil with the filter.
In this article we outline the official oil specifications, capacity, and maintenance considerations for the 2014 Pilot, and how driving conditions can affect your oil choice and change intervals.
Oil type and viscosity
Below are the key specs to ensure you use the right oil in the 2014 Pilot.
- Viscosity: SAE 5W-20
- Oil type: Conventional, synthetic blend, or full synthetic
- Standards: API SN (or newer) and ILSAC GF-5 (or newer)
- Certification: Honda Genuine Oil or any brand meeting the above specifications
Using oil that meets these standards helps protect the engine and maintain performance across typical driving conditions.
Capacity and maintenance intervals
These figures apply to the 2014 Pilot’s engine with the specified oil and filter change.
- Oil capacity: 5.5 quarts (with filter)
- Change interval: Conventional oil typically around 5,000 miles; synthetic blends about 5,000–7,500 miles; full synthetic and your maintenance minder may extend intervals beyond this, often up to 7,500–10,000 miles depending on driving conditions
- Maintenance minder: The vehicle’s Maintenance Minder system helps determine the actual oil-change interval based on how you drive
Always verify the exact interval for your vehicle’s usage in the owner’s manual or via the Maintenance Minder display, and adjust for severe driving conditions if needed.
Engine and climate considerations
The 2014 Pilot uses a 3.5-liter V6 engine; while 5W-20 is the standard recommendation, extremely hot or cold climates may influence your maintenance choices as noted in the owner’s manual. If in doubt, consult the manual or your local Honda service center for climate-specific guidance.
Summary: For a 2014 Honda Pilot, use SAE 5W-20 motor oil (conventional, synthetic blend, or full synthetic) that meets API SN or newer and ILSAC GF-5 standards, with an oil capacity of about 5.5 quarts. Follow the maintenance minder or manual to determine oil-change intervals, typically ranging from 5,000 to 7,500 miles depending on oil type and driving conditions.