For a 2004 Honda HR-V, the standard setup typically uses a 22-inch driver-side front blade, a 20-inch passenger-side front blade, and a 12-inch rear blade. Market variations can apply, so it’s wise to verify the exact sizes for your vehicle.
The 2004 HR-V, like many older Honda hatchbacks and crossovers, often follows a two-front-blade plus single-rear-blade configuration. Sizes can vary by region and trim level, so this guide explains the common measurements and how to confirm the fit for your specific car.
Front wipers sizes
These are the typical front blade measurements used on the 2004 HR-V. Use this as a baseline, but verify with your manual or measurement to ensure compatibility.
- Driver-side front blade: 22 inches
- Passenger-side front blade: 20 inches
When replacing, ensure blade length matches the mounting style on your HR-V (hook, pin, or bayonet end connections) and that the blade covers the correct sweep area without rubbing the hood or fenders.
Rear wiper size
Rear wiper blade sizes for the 2004 HR-V are typically smaller and designed to fit the hatchback’s rear window. The common rear blade size is:
- Rear blade: 12 inches
Rear blade compatibility also depends on the mounting style and the hatch design, so confirm the exact length and attachment type before purchase.
How to verify your wiper sizes
If you want to double-check, use these quick steps to confirm the correct blade lengths for your vehicle.
- Consult the vehicle’s owner’s manual or Honda dealership parts catalog for the exact spec for your year and market.
- Measure the current blades end-to-end, noting which side is driver-facing and which is passenger-facing.
- Check the blade packaging or the installer’s guide at an auto parts store to ensure the length matches your measurements.
- When in doubt, bring the old blades with you to the store to compare fit and mounting type directly.
Accurate sizing is crucial for effective wiping and to avoid interference with the hood, windshield corners, or trim.
Summary
The 2004 Honda HR-V commonly uses 22-inch driver-side front blades, 20-inch passenger-side front blades, and a 12-inch rear blade. Sizes can vary by market, so always verify with the owner's manual or by measuring the existing blades and confirm compatibility with your mounting style before purchasing replacements.