The 2010 Honda Fit uses 5W-20 engine oil that meets API SN or newer, and you can use either conventional or synthetic oil. The total oil capacity with a new filter is about 3.7 quarts.
In detail, the 2010 Fit is equipped with a 1.5-liter i-VTEC engine that requires the 5W-20 viscosity and a current API specification. Oils must meet or exceed Honda’s requirements, and oil changes should be performed at the intervals listed in the owner’s manual. Always verify the exact specification for your climate and driving conditions.
Oil specifications for the 2010 Honda Fit
Key oil specifications you should follow when servicing a 2010 Fit are:
- Viscosity: 5W-20
- Engine oil specification: API SN or newer (API SN+, SM, etc.)
- Oil type options: Conventional, synthetic blend, or full synthetic
- Oil capacity (with filter): Approximately 3.7 quarts (3.5 liters)
Regular oil changes at intervals recommended by Honda help maintain engine health; always refer to your owner’s manual for exact intervals and any regional requirements.
Choosing the right oil
Using oil that meets the above specification ensures proper lubrication and protection for the 1.5L i-VTEC engine. Synthetic oils can offer better temperature stability and longer service intervals, while conventional oils are typically sufficient for normal driving. If in doubt, consult a Honda service professional or your dealer to confirm the latest recommendation for your region.
Summary
For a 2010 Honda Fit, the recommended oil is 5W-20 that meets API SN or newer, with an approximate capacity of 3.7 quarts (including the filter). Both conventional and synthetic oils that meet the specification are acceptable. Always check the owner’s manual or consult a dealer to confirm intervals and any climate-specific requirements.