The Ram 1500 from 2010 uses a standard 12-volt automotive lead-acid battery. The exact group size depends on the engine and configuration.
The 2010 Ram 1500 relies on a conventional flooded 12V battery to start the engine and power accessories. In most configurations there isn’t an AGM option from the factory for that year. The battery label on your current unit will list the group size (the physical size and terminal arrangement), cold-cranking amps (CCA), and reserve capacity (RC). When replacing, match or exceed these ratings and choose a battery suitable for your climate. Check the current battery label or the owner’s manual to confirm the exact specification for your truck’s build.
Battery type and specifications
Most 2010 Ram 1500 models use a standard flooded lead-acid automotive battery. AGM batteries are generally not installed in stock Ram pickups of this vintage unless aftermarket or special equipment has been added. The exact group size you need depends on engine and cab configuration, and the only reliable way to confirm is by checking the current battery label or the owner’s manual.
What to look for on the battery label
- Group size (the fit in the battery tray and terminal layout)
- Voltage: 12V
- Cold-cranking amps (CCA)
- Reserve capacity (RC)
These identifiers guide a correct replacement. If you’re replacing the battery yourself, bring the old label or note the numbers to match.
How to choose and replace
Use the following guidelines to select a replacement that matches or exceeds OEM specifications and performs well in your climate.
- Choose a battery with equal or higher CCA than the OEM rating and the climate requires.
- Ensure the chosen group size matches the vehicle’s tray, hardware, and terminal orientation.
- Prefer a reputable brand and consider a battery with a higher RC if you live in extreme cold or heat.
Installation steps to follow: disconnect the negative terminal first, then the positive; reverse when reconnecting; apply terminal protection and clean any corrosion; and test the system after installation to verify proper charging.
Maintenance and care
Keep terminals clean and tight, inspect for corrosion, ensure the battery is securely mounted, and have the charging system tested periodically. If you store the truck for long periods, consider disconnecting the battery or using a trickle charger to prevent discharge.
Bottom line and how to confirm for your truck
The 2010 Dodge Ram 1500 uses a standard 12-volt flooded lead-acid automotive battery. To be sure you buy the correct size and rating, check the current battery’s group size and ratings or consult the owner’s manual or a Dodge/Chrysler parts catalog with your VIN. If you want a quick answer, you’re looking for a conventional 12V battery with the proper group size and at least the OEM CCA for your climate.
Summary
In short, your 2010 Ram 1500 takes a conventional 12-volt automotive battery (flooded lead-acid). Exact group size depends on engine and cab, typically listed on the label; verify using the VIN or manual. Replacement should meet or exceed OEM ratings for reliable starting power.
What battery fits a Ram 1500?
What kind of car battery does a RAM 1500 use? You will need a 12V lead acid car battery for your RAM 1500. Century, Panasonic and Varta make batteries for your RAM 1500 and we also have other brands.
What battery does a Dodge Ram use?
Some of our most popular batteries for Ram vehicles are the Duracell Ultra Platinum AGM Group 94R Battery, the Duracell Ultra Gold Flooded Group 48 Battery and the Duracell Ultra Gold Flooded Group 94R Battery.
What battery does a 2010 Dodge Ram 1500 take?
Super Start Premium Standard Flooded A1 Battery Group Size 94R H7 720 CCA 120 Minute RC - 94RPRMJ.
What size battery is in the Ram 1500 5.7 Hemi?
DieHard Gold – Battery: H7 Group Size, 800 CCA, 1000 CA, 140 Minute Reserve Capacity (Part No. 94RH7)