What is the torque on the lug nuts on a 2012 Honda Civic?

The lug nuts on a 2012 Honda Civic should be torqued to 80 ft-lbs (108 Nm) when installing wheels.

Official specification

Honda's service data for the 2012 Civic calls for tightening each lug nut to 80 ft-lbs (108 Nm). This applies to the typical 5-lug wheel configuration used on these models. If you have aftermarket wheels or different hardware, always verify the correct torque with the owner's manual or the wheel manufacturer.

• Use a calibrated torque wrench set to 80 ft-lbs (108 Nm).


• Install the correct lug nuts for your wheel and ensure they are clean and undamaged.


• Tighten all lugs evenly to the specified torque.


• Avoid relying solely on impact acceleration; finalize to the specified torque with a torque wrench.

Following these guidelines helps ensure even clamping, reduces the risk of rotor warping or stud damage, and promotes safe wheel retention.

Tightening sequence

To ensure even clamping across the wheel, follow a star or criss-cross tightening pattern rather than tightening opposite lugs in a straight line.

1. Hand-thread and snug each lug to begin seating the wheel.


2. With a torque wrench, snug each lug to about 20–30 ft-lbs to seat the threads.


3. Torque all lug nuts to 80 ft-lbs (108 Nm) in a star/criss-cross pattern.


4. After initial torque, drive a short distance and recheck torque to confirm all nuts remain at specification.

Rechecking after a short drive helps account for settling and ensures the nuts stay properly torqued during operation.

Aftercare and notes

Keep in mind that aftermarket wheels, different lug-nut styles, or hub-centric spacers can affect torque requirements. If you replace a wheel or switch hardware, consult the dealer or wheel manufacturer for the correct specification. Recheck torque after 50–100 miles (80–160 km) of driving, and periodically thereafter as part of routine maintenance.

Summary

For a 2012 Honda Civic, lug nuts should be torqued to 80 ft-lbs (108 Nm) in a star pattern using a properly calibrated torque wrench, with a final recheck after a short drive. Following this procedure helps ensure wheel security, even clamping, and safe operation.

What size lug nuts are in a 2012 Honda Civic?

Wheel Locks Lug Nuts M12 x 1.50 Fit for‌ Honda Accord‌ 2012-2024 | CR-V 2003-2022 | Civic 2010-2015 | HR-V 2016-2022 and More Hex Key Spherical Seat Replace 08W42-SNA-101.

What do I torque my Honda Civic tires to?

The recommended torque is: 110 N·m (11 kg-m,80 Ib-ft) If a torque wrench was not used, ask an authorized Honda dealer to verify the torque as soon as possible. 12. Repair or replace the damaged tire as soon as you can, then reinstall it in its original position on the car, and put the spare back in the car.
PDF

What is the torque spec for the lug nuts on a 2012 Honda Civic?

What torque spec are Honda Civic lug nuts? Honda specifies a torque of 108 Nm for the lug nuts on most Civics. This is the optimal tightening force to keep the wheels securely fastened without over-tightening. It's critical to use a properly calibrated torque wrench when tightening lug nuts.

How much torque does a 2012 Civic have?

2012 Honda Civic Sedan Specifications and Features