The oil filter on a 2016 Honda Accord Sport is located underneath the engine, in a housing near the front of the engine block, and is accessible from beneath once you remove the front undertray.
For the typical 2.4L four-cylinder engine commonly found in the Sport trim, the oil filter is housed inside a cartridge-style canister mounted to the underside of the engine near the oil pan. Exact placement can vary by VIN and model configuration, so consult the owner's manual or a repair guide specific to your car if you’re unsure.
How to locate and access the oil filter
To locate and access the oil filter on this model, follow these steps:
- Park the car on level ground, engage the parking brake, and turn off the engine. If you plan to change the oil as well, raise the front of the vehicle and support it securely with jack stands, then remove the front undertray or splash shield to expose the bottom of the engine.
- Slide under the vehicle and locate the oil pan. Look for a cylindrical oil filter housing mounted near the front of the engine block, typically on the passenger side above or adjacent to the oil pan.
- Use the appropriate tool to loosen and remove the filter housing cap (or the filter cap, depending on your setup). If you have a cartridge filter, the old element will be inside the housing.
- Remove the old filter element, inspect the housing for debris, and install the new filter element with a new gasket or O-ring if provided. Refit and tighten the housing cap to the specified torque in the service manual.
- Reinstall the front splash shield, lower the car, refill the engine with the correct oil, start the engine, and check for leaks around the filter housing.
After completing these steps and verifying there are no leaks, dispose of the old filter and used oil properly at an authorized facility.
Summary
In short, the oil filter on the 2016 Honda Accord Sport is tucked under the engine in a cartridge-style housing near the front of the block, accessible from beneath once the undertray is removed. While this description covers the common 2.4L inline-four configuration, always verify the exact location for your VIN with the owner's manual or a trusted repair guide to ensure proper service procedure and torque specifications.