The part number for the oil filter on a 2008 Mazda3 is not universal. The exact Mazda Genuine oil filter part number depends on which engine your car uses (2.0‑L or 2.3‑L) and the market where the car was sold. Confirming the engine code and using Mazda's official parts catalog yields the correct number.
Engine variants and part numbers
In 2008, the Mazda3 offered two engines in many markets. The needed oil filter is specific to the engine. Here’s how they differ in approach:
- 2.0 L engine variant: Identify the engine code in the vehicle documentation; Mazda's parts catalog will list the corresponding oil filter part number for that engine.
- 2.3 L engine variant: Same process; the 2.3 L uses a different filter from the 2.0 L, so you must reference the engine code to avoid ordering the wrong part.
Conclusion: The engine variant determines the exact oil filter part number; the catalogs and dealership systems are designed to reflect this.
How to identify the exact part number
To ensure you obtain the correct filter, follow these steps:
- Check the vehicle identification number (VIN) and the engine code, typically found under the hood on a label or in the owner's manual, to confirm which engine is in your 2008 Mazda3.
- Consult the Mazda official Parts Catalog (or your local dealer's parts database) using the VIN or engine code to pull the precise oil filter part number for your car.
- Inspect the current oil filter for markings; many filters carry the Mazda part number or a manufacturer code (e.g., "M" series, or a cross-reference).
- If you can't access the catalog, provide the year, make, model, engine (2.0 L or 2.3 L), and market to a Mazda dealer or trusted parts retailer to cross-reference.
With these steps, you can confirm the exact part number rather than guessing from a generic listing.
Where to buy and verify
Once you have the part number, you can buy from a Mazda dealer, an authorized parts retailer, or reputable aftermarket brands that list the Mazda part number as a cross-reference. Always double-check the fitment by engine code and market.
- Mazda official parts catalogs (online or at a dealership)
- Authorized Mazda parts retailers and dealerships
- Reputable aftermarket retailers that provide exact cross-references to Mazda part numbers
Note: When substituting with aftermarket options, verify the filter’s compatibility with your engine specification and oil viscosity requirements (e.g., oil type and grade).
Summary
Bottom line: The 2008 Mazda3 may use different oil filters depending on the engine installed. The precise part number must be looked up using the engine code or VIN in Mazda’s official catalogs or through a dealership. This ensures you obtain the correct filter for your specific vehicle configuration.
What kind of oil does a Mazda 3 2008 take?
While earlier generations (2004–2013) are best served with SAE 5W-30 oil, the introduction of SKYACTIV technology in 2014 shifted the recommendation to SAE 0W-20 for naturally aspirated engines and SAE 5W-30 for turbocharged variants.
What kind of oil filter does a 2007 Mazda 3 take?
While some vehicles use cartridge-style filters, the oil filter for your 2007 Mazda 3 is a spin-on canister type that can be installed from underneath.
What car does the PH7317 oil filter fit?
Broad Compatibility: The PH7317 filter fits a wide range of Honda, Subaru, Nissan, and Acura vehicles from 2001 to 2023.
Where is the oil filter on a 2008 Mazda 3?
Now. And let that drain. I had an issue with my phone so I'm missing the first part of removing this oil filter that's why you don't see a whole lot of oil right. There.