The oil filter for the 2014 Infiniti Q50 with the common 3.7-liter V6 is typically 15208-7U50A. Always verify the exact part for your vehicle using the VIN and an official parts lookup.
The 2014 Q50 lineup can be equipped with different engines depending on market and trim, so the precise filter number can vary. This article outlines how to confirm the correct part for your exact car and provides the most reliable reference point for the common 3.7L V6 configuration.
Confirming the right oil filter for your Q50
To help you confirm the exact filter for your vehicle, use the steps below. They are designed to ensure you purchase the correct part, whether you buy OEM or a trusted aftermarket equivalent.
Engine options in the 2014 Q50
In the US market, the 2014 Infiniti Q50 primarily used the 3.7L V6 (VQ37VHR). Other engines may appear in different regions or later model years, which can require a different filter number. Always verify with your VIN.
How to verify the correct part number for your car:
- Check the vehicle’s owner’s manual or service manual for the exact OEM oil filter part number.
- Use Infiniti/Nissan official parts lookup tools or contact a dealer with your VIN to pull the precise PN.
- If using aftermarket options, choose a filter with the same thread size, bypass rating, and overall dimensions, and cross-check compatibility with your VIN or engine code.
Once you identify the correct PN, you can purchase OEM or a reputable aftermarket filter with confidence. If you’re unsure, consult a dealer or qualified mechanic.
Engine variants and the oil filter numbers
2014 Q50 — 3.7L V6 (VQ37)
The most commonly cited OEM oil filter for this engine in 2014 Q50 models is 15208-7U50A. This number is widely used in Infiniti’s parts catalogs for the 3.7L V6 configuration.
Other Q50 engines or markets
Engine options beyond the 3.7L V6 can require different filter numbers. If your vehicle uses a different engine or was sold in a market with alternate specifications, verify the exact PN through VIN-based parts lookup or a dealer.
Summary
For the 2014 Infiniti Q50 with the standard 3.7L V6, the oil filter part number is typically 15208-7U50A. Because engine configurations and regional offerings can vary, always confirm the exact PN using your VIN via Infiniti’s official parts lookup or by consulting a dealer. This ensures you install the correct filter, OEM or a validated substitute.
What type of oil does a 2014 INFINITI Q50 take?
5W-30 motor oil
The Infiniti Q50 requires 5W-30 motor oil that meets the API certification standards. The recommended oil viscosity is 5W-30, which means that the oil has a low viscosity when cold and a high viscosity when hot. Using the right type of oil is important for the performance and longevity of your Q50's engine.
Where is the Q50 oil filter?
So here's a filter. And here's the drain plug. So size for the drain plug is 14 mm.
What oil filter does Q50 use?
Mobil 1 – Oil Filter: Ideal for Synthetic Oil, Protection To 20,000 Miles (Part No. M1-108A)
How do I know my oil filter size?
Check your car's owner manual
The manual provides specific recommendations for the type and size of the oil filter that is compatible with your car's engine and oil system. Adhering to these specifications ensures optimal performance and prevents potential damage to the engine.