The factory lug nuts for a 2012 Dodge Charger are metric M14x1.5 with a 60-degree conical (acorn) seat, used on the 5x115 mm bolt pattern. Most stock setups require a 21 mm socket for removal and installation. Always verify with your exact wheel package, as aftermarket wheels or trim levels can vary.
Stock lug nut specifications
The following specs cover the typical factory configuration for a 2012 Charger. If your car uses aftermarket wheels, consult the wheel maker’s specs or your owner’s manual.
- Bolt pattern: 5 lugs on a 115 mm circle (5x115)
- Thread size: M14 x 1.5
- Seat type: 60-degree conical (acorn) seat
- Hex size: commonly 21 mm for removal/installation
- Notes: This combination is standard for many Mopar wheels; aftermarket wheels may use different lug nut sizes or seat types
In short, these are the usual parameters you’ll encounter with the 2012 Charger’s stock wheels. If your setup differs, verify before buying replacements.
How to verify your specific vehicle
To confirm your exact lug nut size, use these steps to check your car’s current configuration and documentation.
- Check the door jamb information placard or the owner’s manual for wheel data (bolt pattern, lug nut size, and sometimes torque specifications).
- Inspect the current lug nuts for thread pitch and seat type, and measure if necessary to confirm M14x1.5 and a 60-degree conical seat.
- If you have aftermarket wheels, consult the wheel manufacturer or a dealership to ensure you use the correct lug nuts for those wheels.
When in doubt, a dealership or professional tire shop can confirm the exact lug nut size and seat type for your specific Charger configuration.
Aftermarket wheels and lug nuts
Aftermarket wheels may require different lug nut specifications. Be mindful of potential variations in thread size, seat shape, and hex size, which can affect fit and safety.
- Common alternatives include M14x1.5 with different seat types (e.g., ball-seat) or different bolt patterns if the wheel is not OEM
- Always match the wheel manufacturer’s lug nut recommendations and torque requirements
- Ensure the lug nuts are compatible with the wheel’s hub-centric design to avoid vibrations
Following these guidelines helps ensure proper fitment and safe operation when swapping to aftermarket wheels on a 2012 Charger.
Summary
For most 2012 Dodge Chargers, the standard lug nuts are M14x1.5 with a 60-degree conical seat on a 5x115 bolt pattern, typically requiring a 21 mm socket. Always verify your specific wheels and consult official documentation or a professional if you’re using aftermarket parts.