The most common OEM oil filter for a 2000 Honda Accord is 15400-PLM-A01 for the 2.3L four-cylinder; the V6 variant uses a different filter, typically 15400-RAA-A01. Always verify with your engine code or VIN to ensure fitment.
Understanding engine variations and their impact on part numbers
The 2000 Accord offered more than one engine option, and the oil filter part number is not universal across all configurations. Checking your exact engine type or VIN helps ensure you purchase the correct filter. Below is a quick-reference guide to the most common OEM numbers associated with the 2000 model year.
Common OEM oil filter part numbers by engine configuration (for quick reference):
- 2.3L four-cylinder (F23A) — 15400-PLM-A01
- 3.0L V6 — 15400-RAA-A01
These numbers reflect typical OEM part numbers used on U.S.-market 2000 Accords. Regional variations can exist, so it’s wise to double-check with a dealer or an up-to-date parts catalog using your VIN.
How to verify the exact part for your car
To guarantee the right filter, confirm your engine code and VIN, then cross-reference with an official Honda parts catalog or a trusted parts retailer. If you’re replacing an existing filter, you can also measure the thread size and gasket diameter of the removed unit to guide your purchase. For aftermarket options, ensure the replacement matches the required thread pitch and seal size and offers equivalent or better filtration performance.
Where to locate engine code and VIN
The engine code is typically found on the emissions label under the hood or on the engine block. The VIN is located on the driver’s side dash near the windshield and on the driver’s side door jamb or frame. Using these identifiers helps you pull the exact part number quickly and accurately.
Summary
In a 2000 Honda Accord, the oil filter part number depends on the engine. For the 2.3L four-cylinder, the OEM part number is usually 15400-PLM-A01; for the 3.0L V6, the part number is typically 15400-RAA-A01. Always verify with your VIN/engine code and consult an up-to-date parts catalog or dealer to confirm the correct filter before purchasing.
What oil filter does a 2000 Honda Accord take?
This OEM Honda oil filter, part number 15400-PLM-A02, fits select Honda vehicles from model years 2000 all the way to 2021.
What is the part number of the Honda oil filter?
15400-PLM-A02
Genuine Honda Oil Filter - 15400-PLM-A02.
What oil filter does the Honda Accord take?
15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.
What is the oil filter number on a Honda s2000?
15400-PCX-306
The 15400-PCX-306 is an OEM Honda oil filter. This filter is responsible for collecting impurities and other debris that may accumulate in the motor oil as it lubricates the engine parts.