The bolt pattern on a 2012 Honda Fit is 4x100 mm—four lug holes arranged on a 100 mm circle. This is the standard pattern for the model and is the primary factor when selecting compatible wheels, rotors, and adapters.
Bolt pattern specifics for the 2012 Fit
To ensure correct wheel fitment, note these related specs that commonly accompany the 4x100 pattern on this model. They affect centering, mounting hardware, and overall clearance.
- Bolt pattern (PCD): 4x100 mm (four lug holes on a 100 mm bolt circle)
- Center bore: 56.5 mm
- Lug nut size and thread pitch: M12 x 1.5
- Lug nut seat type: conical (60-degree) seat
- Number of studs: 4
Having these dimensions ensures wheels and rotors will mount correctly and sit properly on the hub, reducing the risk of vibration or improper seating.
Cross-compatibility and mounting tips
When upgrading wheels, always verify both the bolt pattern and the center bore. If the wheel's center bore is larger than 56.5 mm, you may need hub-centric rings for proper centering. If the bore is smaller, the wheel will not fit without modification, which is not recommended.
Summary
In summary, the 2012 Honda Fit uses a 4x100 bolt pattern with a 56.5 mm center bore, and lug nuts sized M12 x 1.5 on a 4-lug arrangement. This information helps you select compatible wheels, rotors, and accessories while avoiding mounting problems.