The typical OEM oil filter for a 2018 Toyota Corolla with the common 1.8-liter engine is 04152-YZZA1.
In practice, this number can vary by region and by whether your car uses the standard gasoline engine (1.8L, 2ZR-FE) or the hybrid (1.8L, 2ZR-FXE). Markets outside North America and different trim levels may use related but slightly different part numbers. To be certain, verify against your VIN, the owner's manual, or a Toyota parts catalog.
How to confirm the exact oil filter for your car
Use these steps to verify the correct oil filter number for your 2018 Corolla, accounting for engine type and region.
- Identify your engine type and variant (gasoline 1.8L with 2ZR-FE vs. hybrid 2ZR-FXE) and confirm your market region.
- Check the oil filter you removed or the filter you’re purchasing for the part number printed on the filter itself or on its packaging.
- Consult the official Toyota parts catalog using your vehicle’s VIN to pull the exact OEM number.
- When buying aftermarket, use the OEM number as the cross-reference and verify compatibility with your Corolla's year, engine, and region.
Following these steps will help ensure you select the correct filter and avoid ordering an incorrect part.
Additional notes on compatibility
While 04152-YZZA1 is widely used for the 2018 Corolla’s 1.8L gasoline engine, certain markets or hybrid configurations may list a slightly different part code. Always double-check with a trusted source—such as a Toyota dealer, official parts diagram, or your VIN-specific lookup—to avoid misfits.
Summary
For many 2018 Toyota Corollas, the standard oil filter part number is 04152-YZZA1. Variations exist by engine variant and market, so verify via VIN or official parts resources before purchasing. If in doubt, consult the owner's manual or a Toyota parts database to confirm the exact number for your vehicle.