For the 2011 Honda Accord, the oil filter part number depends on which engine your car uses. The two most common engines in that model year are the 2.4-liter inline-four and the 3.5-liter V6. The corresponding Honda genuine filter numbers are 15410-PLM-A01 for the 2.4L engine and 15410-R40-A01 for the 3.5L engine.
Engine options and corresponding filter numbers
The following list maps the two primary engines offered in the 2011 Accord to their respective oil filter part numbers.
- 2.4L inline-four engine (K-series): 15410-PLM-A01
- 3.5L V6 engine (J-series): 15410-R40-A01
If you’re unsure which engine your specific car uses, or if your car was sold in a different market where part numbers may vary, verify with the dealer or by checking the VIN-specific parts catalog to confirm the exact filter.
How to confirm the exact oil filter for your car
To ensure you buy the correct filter, use a VIN-based check and cross-reference with Honda’s official catalogs or a trusted parts retailer.
- Locate your vehicle’s engine type (2.4L or 3.5L) by checking the owner’s manual, under-hood label, or service records.
- Reference the engine type to match the appropriate part number listed above.
- For absolute certainty, contact a Honda dealer or enter your VIN into an official parts lookup to confirm the exact oil filter part number for your car’s production date and market.
Note: Regions and production runs can introduce small variations in part numbers. Always verify with a trusted source if you’re buying from a retailer or performing a dealer-installed change.
Summary
The 2011 Honda Accord typically uses 15410-PLM-A01 for the 2.4L engine and 15410-R40-A01 for the 3.5L engine. If you know your engine code or VIN, you can confirm the exact part quickly through Honda’s official catalogs or a reputable parts retailer.