The lug pattern for the 1995 Honda Accord is 4 on a 114.3 mm circle (4x114.3). In other words, the car uses a 4-lug bolt pattern with a 114.3 mm bolt circle.
This applies to the fifth-generation Accord (model years 1994–1997) and aligns with many other Honda models of that era, which helps when shopping for aftermarket wheels.
Bolt pattern details
Understanding the bolt pattern helps you shop for wheels and ensure a proper fit.
What 4x114.3 means
It means there are four lug studs arranged on a circle 114.3 millimeters in diameter. The shorthand is 4x114.3, or 4x4.5 inches in inch-based terminology.
Before you consider wheel options, note these key points:
- Bolt pattern: 4x114.3 mm (4 on a 114.3 mm circle).
- Common among Honda/Acura models of the era; aftermarket wheels are widely available in this pattern.
- Center bore and offset are separate fit factors—verify both to ensure proper hub centering and brake clearance.
Bottom line: If you find wheels labeled 4x114.3, they are likely compatible with this Accord, provided you also match offset and center bore.
Practical steps to verify fit
To verify compatibility before buying wheels, follow these steps:
- Confirm the bolt pattern as 4x114.3 mm (4 on a 114.3 circle).
- Check the wheel's center bore size or plan to use a hub-centric ring if needed.
- Verify the wheel offset and width won’t cause caliper or fender interference.
- Ensure lug nut type and thread size match your wheels and studs.
With these checks, you can confidently select wheels for a 1995 Accord.
Summary
The 1995 Honda Accord uses a 4x114.3 mm bolt pattern, a common configuration for its generation and many Honda models of that era. When replacing wheels, confirm not only the bolt pattern but also center bore, offset, and clearance to ensure proper fit and safe operation.