The bolt pattern for a 2010 Honda Odyssey is a five-lug configuration: 5x114.3 mm, meaning five lug holes spaced 114.3 millimeters apart. The wheel hub bore is 64.1 mm, and the standard lug nut size is M12x1.5 with a 60-degree conical seat.
In practice, this means most wheels that fit Honda models from around that era will fit the Odyssey, but differences in wheel offset and hub-centric design can affect fitment. Below are the core specifications you should confirm if you are replacing wheels or ordering alloys for a 2010 Odyssey.
Core wheel-fit specifications
Before the list, here's a concise set of essential fitment details for the 2010 Odyssey. Make sure any wheels you consider match these metrics or are designed specifically for your vehicle.
- Bolt pattern: 5x114.3 mm (five lug holes, 114.3 mm apart)
- Center bore: 64.1 mm
- Lug nut size and thread: M12×1.5 with a 60-degree conical seat
- Number of lug nuts: 5
These specifications ensure the wheel mounts properly to the Odyssey's hub, aligns with the braking components, and seats correctly against the stud pattern. If you choose aftermarket wheels, verify offset compatibility and consider hub-centric rings if the center bore differs.
Summary
For a 2010 Honda Odyssey, the standard wheel-fit pattern is 5x114.3 mm with a 64.1 mm center bore and M12×1.5 lug nuts. Always confirm exact specs with OEM data or the wheel supplier, especially when shopping aftermarket rims, to ensure proper fitment and safety.