The OEM air filter part number for most 2008 Honda Fits in North America is 17220-5A2-003. This number covers the 1.5-liter engine commonly used in these models, though regional differences can apply. Always verify with a dealer or by checking your vehicle’s VIN in the official parts catalog.
In this article, we explain how to confirm the exact part number for your specific car, where to locate it on the vehicle, and what to consider when ordering an air filter replacement for the 2008 Fit. We also outline general replacement guidelines and tips to avoid ordering the wrong part.
About the 2008 Honda Fit air filter
The 2008 Honda Fit uses a standard panel air filter that sits inside a rectangular airbox under the hood. Replacing the filter at recommended intervals helps the engine breathe clean air, maintain performance, and preserve fuel efficiency.
How to verify the correct part number
Use these steps to confirm the exact air filter part number for your specific vehicle:
- Check the current air filter or its housing for a printed part number on the filter element or lid.
- Consult the owner's manual or service manual under Maintenance > Air Filter Replacement.
- Inspect the inside of the air box lid for a sticker listing the OEM part number for your market.
- Enter your VIN on Honda’s official parts website or contact a dealership’s parts department to pull the exact match.
- If purchasing aftermarket, ensure the replacement is listed as compatible with the 2007–2008 Fit with the 1.5L engine (engine codes may vary by market).
Confirming through one or more of these methods minimizes the risk of ordering the wrong filter.
Regional and model variations
Regional differences exist; some markets may use slightly different numbers for the same filter assembly or refer to the part in regional catalogs differently. Always cross-check against your VIN.
Replacement basics and buying guidance
Typical replacement guidance for the air filter on a 2008 Honda Fit includes the following:
- Replacement interval: about every 15,000 miles (24,000 km) under normal driving; more often in dusty or harsh conditions.
- What you’ll need: minimal tools; most fits use clips or screws to release the air box lid.
- Steps: open the hood, locate and open the air box, remove the old filter, inspect the housing for debris, insert the new filter with the correct orientation, reseal the box, and secure the clips or screws.
- Disposal: dispose of the used filter according to local regulations.
Following these steps helps keep the engine clean and performing well in a 2008 Fit.
Summary
For most 2008 Honda Fit models in North America, the OEM air filter part number is 17220-5A2-003. Always verify with a dealer or official parts catalog for your exact VIN and market, as regional variations may apply. Regular replacement of the air filter helps maintain optimal engine performance and fuel economy.