The 2020 Honda Passport uses a standard J-hook wiper-arm connection. Replacement blades typically come with a J-hook adapter, and you should verify the correct blade lengths for the driver and passenger sides before buying.
Connector type on the Passport’s wiper arms
The Passport employs a conventional hook-style attachment on its wiper arms, commonly referred to as a J-hook. This is the most widespread connection for Honda SUVs from this era. When shopping for replacement blades, look for blades labeled as J-hook or Hook-type adapters to ensure a proper fit. Some aftermarket blades are sold with universal adapters, but you’ll want the J-hook option for a hassle-free install.
Why this matters for blade compatibility
Because wiper blades use different adapters, ensuring the blade you buy includes a J-hook adapter (or is explicitly listed as J-hook compatible) will save you time and avoid fitting issues. If you accidentally pick a blade that’s only compatible with a pinless or other non-J-hook arm, you may need to swap adapters or choose a different blade.
What blade lengths should you buy?
The driver- and passenger-side blades are different lengths. For the Passport, the driver’s side blade is typically longer than the passenger side. Exact lengths can vary by trim and production year, so confirm by checking the blade you’re replacing or the owner’s manual. If in doubt, measure the current blades or consult the vehicle’s information sticker or manual.
- Driver-side length: approximately 26 inches (verify on your vehicle or in the manual).
- Passenger-side length: approximately 18 inches (verify).
- Adapter compatibility: ensure the package includes a J-hook adapter or select a blade labeled for J-hook compatibility.
- OEM vs aftermarket: both options exist; choose based on price, performance, and warranty, ensuring J-hook compatibility.
Conclusion: When selecting wiper blades for the 2020 Passport, prioritize blades that are labeled as J-hook compatible and select the correct lengths for the driver and passenger sides. This ensures a straightforward replacement with a secure fit.
How to replace the blades
Before you begin, confirm you have the correct blade lengths and a blade that includes a J-hook adapter. The steps below assume you’re using J-hook blades intended for the Passport.
- Lift the wiper arm away from the windshield and secure it in a fixed position.
- Locate the release mechanism where the blade meets the wiper arm (the J-hook connection) and depress or unlatch it to free the old blade.
- Slide the old blade out of the hook and remove it from the arm.
- Attach the new blade by aligning it with the J-hook and sliding it onto the arm until it clicks or locks in place.
- Gently lower the wiper arm back onto the windshield and test the blades to confirm proper contact and clearance.
Conclusion: The replacement process is straightforward when you have the correct J-hook blades and the proper lengths. Take a moment to confirm fit before final installation to ensure optimal performance.
Summary
Summary: The 2020 Honda Passport uses a standard J-hook hook-type connection for its wiper arms. Buy blades labeled as J-hook compatible in the correct driver- and passenger-side lengths (typically around 26 inches and 18 inches, respectively, but verify for your vehicle). Confirm adapter compatibility on the packaging, and follow the simple replacement steps to swap the blades. This approach yields a quick, secure fit and reliable wiper performance.
What size wiper blades for a 2020 Honda Passport?
2020 Honda Passport Wiper Blades Size/Price Chart
| Car | Driver | Pass. |
|---|---|---|
| 2020 Honda Passport | 26 in. | 24 in. |
What size hook for wipers?
Found in numerous sizes from 7mm wide to 12mm wide. By far the most popular are the 9x3 (small) and 9x4 (large) hook arms.
How to remove Honda Passport 2020 wiper blades?
The RainX wiper blade right here the advanced edge this is 26 mm for the driver. Side. And it's 24 for the passenger. Side. So it's 24 on the passenger side guys.
Are all windshield wiper hooks the same?
While the three most common connector styles are J-hook, side pin and bayonet, you might be surprised by the variety of designs that manufacturers use. J-hook – The most common type of connector, the J-hook has a J or U-shaped hook at the end.