If you drive a 2006 Honda Accord, Fram offers several compatible oil filters depending on the engine. The most commonly used Fram models are PH7317 and XG7317 for the 2.4L four-cylinder, and PH8170 and XG8170 for the 3.0L V6. Always verify with Fram's official fit guide to ensure the exact model matches your engine and trim.
Understanding the 2006 Accord engine options
The 2006 Honda Accord was available with two main engine configurations: a 2.4-liter four-cylinder (K24A family) and a 3.0-liter V6 (J30A family). The correct Fram oil filter must align with your engine’s thread size, gasket diameter, and overall height. Fram publishes different SKUs for different engine families, so identifying your engine is the first step in selecting the right filter.
Fram filter options for the 2006 Accord 2.4L four-cylinder
For the 2.4L four-cylinder version of the 2006 Accord, Fram offers a couple of widely used options designed to fit most 2.4L Accords of that era.
- PH7317 — Fram Extra Guard oil filter
- XG7317 — Fram Ultra Synthetic oil filter
These two options cover standard and synthetic filtration preferences while aligning with typical 2.4L Accord filter specifications.
Fram filter options for the 2006 Accord 3.0L V6
For the 3.0L V6 version of the 2006 Accord, Fram provides models that cater to standard and synthetic filtration needs, designed to fit the V6 engine’s oil flow requirements.
- PH8170 — Fram Extra Guard oil filter
- XG8170 — Fram Ultra Synthetic oil filter
These options mirror the approach used for the 2.4L, offering a choice between conventional and synthetic filtration with appropriate filtration efficiency and capacity for the V6 engine.
How to verify you have the right filter
To ensure you select the exact Fram model for your specific Accord, follow a few verification steps. These steps reduce the risk of choosing an incompatible filter and help maintain proper oil pressure and engine protection.
- Identify your engine code (K24A for the 2.4L or J30A for the 3.0L) on the engine block or in your vehicle documentation.
- Check your current filter’s part number or measure key dimensions (thread size, outer diameter, height) to compare with Fram’s specifications.
- Use Fram’s official Filter Finder tool or contact a Fram retailer with Year/Make/Model/Engine to confirm exact compatibility for your vehicle configuration.
- Consult your owner's manual or dealer to confirm any model-specific notes, such as updated filter recommendations for particular trims or production changes.
Following these steps helps ensure you pick a filter that fits perfectly and maintains optimal oil flow and filtration for your engine.
Installation and maintenance tips
Once you’ve chosen the correct Fram filter, replace the gasket and ensure a clean seating surface. Refrain from over-tightening the filter, and always use a fresh drain plug washer if applicable. After installation, run the engine for a few minutes and check for leaks, then recheck the oil level after a brief idle and top off if needed.
Summary
For a 2006 Honda Accord, Fram’s commonly used options are PH7317 and XG7317 for the 2.4L four-cylinder, and PH8170 and XG8170 for the 3.0L V6. Always verify the exact filter against your engine code and trim using Fram’s fit guide or a trusted retailer. This ensures a proper seal, correct oil flow, and long-term engine protection.