On a 2022 Honda Accord, you can quickly view tire pressures through the car’s Tire Pressure Monitoring System (TPMS) readout on the instrument cluster, and you can confirm numbers manually with a tire gauge using the door placard as a reference. This article explains both methods so you can stay on top of your tires’ health and safety.
Using the TPMS display in the instrument cluster
The quickest way to check all four tires is through the TPMS readout that appears in the dashboard’s information display. Follow these steps to access it on most trims of the 2022 Accord:
- Turn the ignition to the ON position (accessory power) without starting the engine so the dashboard powers up.
- Use the steering wheel controls to navigate to the information or vehicle status screen. Cycle to the Tire Pressure/TPMS page where you can see each wheel’s current pressure.
- Read the pressures shown for the front-left, front-right, rear-left, and rear-right tires. The display shows cold-pressure values, which can change slightly as the tires warm up during driving.
In most cases, this TPMS readout provides a quick, at-a-glance view of whether any tire is underinflated and how close each tire is to the factory-recommended pressure.
Manual tire pressure check and door placard reference
If you prefer to verify pressures with a gauge or want to confirm the exact pressure using a known standard, manual checks are recommended. Use the door placard for the correct cold pressures and a reliable gauge to measure each tire.
- Locate the door placard on the driver’s door jamb. It lists the recommended cold tire pressures for the front and rear tires, based on your tire size and load. For many 2022 Accords with factory tires, this is commonly around 32 psi, but check your specific placard for accuracy.
- Check tires when they are cold (before driving or after the car has sat for several hours). Remove the valve stem caps and press a tire pressure gauge onto the valve stem to get a reading.
- Inflate or deflate each tire with a quality air pump until you reach the recommended pressure on the placard. Recheck after adjustment to ensure accuracy.
- Remember to check the spare tire as well if you carry a full-size or donut spare; the spare often has its own pressure specification on its label.
Manual verification ensures accuracy and is useful if the TPMS readings seem inconsistent or if you’ve recently rotated or replaced tires.
TPMS warnings and calibration tips
If the TPMS warning light stays on after inflating to the recommended pressures, drive the car for a few miles to allow the system to recalibrate. If the light remains illuminated, inspect tires for slow leaks or damage. Some tire changes or rotations may require a TPMS reset or reprogramming; refer to the owner’s manual for your specific trim’s procedure, or ask a Honda dealer or qualified technician for assistance.
Summary
The 2022 Honda Accord offers both an in-dash TPMS readout and manual checking options to monitor tire pressures. Access the TPMS readout through the instrument cluster to quickly view each tire’s current pressure, or verify pressures with a gauge using the door placard as the reference. Always check tires when cold, follow the placard’s recommended values, and recheck after adjustments. Don’t forget to review the spare tire’s pressure if you carry one, and be aware that the TPMS may recalibrate after a short drive or may require a reset after tire service.